WTB - Brake hard lines that run from pressure regulator on rear firewall to the rubber soft lines at the caliper. Must fit a '71. I might have parts to trade depending on what you need. thanks, Mark
http://www.pmbperformance.com/page/page/1925563.htm
Mark,
I think Eric Shea has what you're looking for. $38.00 + shipping according to his website.
http://www.pmbperformance.com/catalog/item/1925563/8824000.htm
Ack! Got beat.
PMB's brake lines are the hard lines from the juction around the pivot point of the trailing arm (under the engine shelf) to the soft lines at the caliper.
IIRC there are two hard lines per side that get you from the regulator to the soft lines.
I made my own with lengths from the FLAPS, a tubing cutter and borrowed their double flaring tool. Costs about $7.00 per side for rears.
I have them.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)