Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB: 2.0 Engine tin

Posted by: billh1963 Aug 20 2012, 01:09 PM

Well, upon further inspection I think I need to replace my tin. The tin I have on my '76 2.0 was cut for A/C and has been generally abused.

Looking for a complete set of tin (thanks to JRust I do not need the tin between the push rod tubes and the cylinders).

Let me know what you have!

Posted by: The Cabinetmaker Aug 20 2012, 02:33 PM

I should have everything you need Bill. When you say all pieces, are you including the ones that go under the top tins in the front and back? Or just the front under the fan(2). 2 above the cylinders, and the rear?

Posted by: billh1963 Aug 20 2012, 02:43 PM

QUOTE(The Cabinetmaker @ Aug 20 2012, 04:33 PM) *

I should have everything you need Bill. When you say all pieces, are you including the ones that go under the top tins in the front and back? Or just the front under the fan(2). 2 above the cylinders, and the rear?


I would like all pieces except for the flat pieces that go under the cylinders (above the push rod tubes). Some of my tin is okay; however, much of the top tin on the passenger side was butchered from the a/c installation.

Posted by: Valy Aug 23 2012, 11:53 AM

Here you go
Attached Image
Attached Image

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)