***SOLD*** Here's a late model mirror (larger viewing area than the early mirrors). Really good shape. I can ship it with a new mirror pad for an extra $3.00
Asking $10.00 plus Shipping.
***Sold*** Here's another from a 911 but it's the same exact size as the 914 mirror. it has a smaller pebble grain. This is not in as good of shape as the previous mirror. but could be cleaned up with some plastic polish on the lip.
Asking $5.00 plus shipping.
Attached thumbnail(s)
***Sold*** Delrin clutch pulley. I think I won this at a WCR . Piece is new. Asking $10.00 olus shipping.
Attached thumbnail(s)
***Sold*** Here's a couple of door stays.
Asking $5.00 each plus shipping.
Attached thumbnail(s)
***Sold*** How about a pair of interior door handles?
Asking $5.00 each plus shipping.
Attached thumbnail(s)
***Sold*** Here's another fine piece from 914rubber. Trunk latch bushing.
Asking $5.00 plus shipping.
Attached thumbnail(s)
***Sold*** Pair of used window cranks. Good shape but not perfect.
Asking $5.00 each plus shipping.
Attached thumbnail(s)
Stunning Bosch 6-Cyliner Dizzy. Curve and dizzy modified by Arron at Rennwerks in Camarillo. Very cool dizzy. I went twin plug. Smoke'n dizzy for a short stroke six.
Asking $450.00 plus shipping.
Attached thumbnail(s)
***Sold*** Plated rear control arm shafts.
$10.00 each plus shipping.
Attached thumbnail(s)
***Sold*** Pair of amazing headlight frames. These frames were clear zinc plated then painted with the proper factory grey.
$20.00 plus shipping.
Attached thumbnail(s)
5-lug Struts and Shocks!
Left to right:
T-Struts - $200.00 Powder coated with plated top nuts. These Boge struts have the 3" spacing and the later model wedge pin base.
Solo 3.5" Bilstein Drivers strut load with good insert $150.00
3.5" Boge Struts with backing plates $300.00 Soda blasted and painted
Original Koni Inserts - $75.00 for the pair (need rebuilding)
Back row - Vintage Koni Rear Shocks and 140lb springs. Restored to excellent condition. $299.00
Attached thumbnail(s)
message sent for the 1st item 914 rear view mirror.
Thank you!
Noel
I would like to buy the 1st mirror if still available and the Delrin clutch pulley.
PM sent
You're next in line on the mirror. I'll mark the bushing sold.
I'll take the 2 door stays and the rear trunk latch bushing.
Thanks.
2nd in line on the door stays.
Greg
Eric, I'll take the interior door handles. pm sent
Ill take the interior door handles off your hands.
*edit* AH lost by 2 minutes
Window cranks are back on the market.
I'll take the headlight frames @ $20.
Let me know shipping to 21403
Thanks Eric....
Mike
i'll take the window handles. shall we apply cost to the "credit"? do you still have the black plastic washers that mount between the handles and the int door panels?
k
Plated rear control arm shafts.
$10.00 each plus shipping. I'll take 2 of these. Pm me your address for payment.
More info on the dizzy. Would you know if it'll work with a 2.7 RS engine ?
Luke
I'd like a pair of these coated rear control arm shafts. Do you have more than 1 set available because I believe I'm second in line. Let me know when you have a chance.
Thanks,
Mark
Hey Eric, I'm also interested in the second rear view mirror. Let me know if it's still available.
Thanks,
Mark
Busy day... I think I answered all all PM's Looks like we have the dizzy, struts and shocks and the fuel pump mount available.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)