Hey Guys,
I'm in the middle of a restoration of my '72 and seemed to have misplaced the pax side line (P/N 914 355 618 00).
Anyone wanna pull one from a parts car?
Thanks.
JCN
KLU
PMB has new ones. They are NLA from dealer.
Jcn. Do you need the long metal lines from the master cylinder?
Action Auto carries the lines you need for about $5 or $10. You will need to bend them yourself but it's not that hard to do.
And my bad. I wasn't really too clear on _which_ pipe exactly.
I'm needing the long pipe that runs from the master cylinder out to the wheel well. It's about 2 ft. long. It's #7 in this diagram:
http://c767504.r4.cf2.rackcdn.com/604-05.gif
and it runs along the front wall of the steering rack.
Sorry for the confusion. PMs welcome.
Thanks.
JCN
KLU
I have one of those.
Thanks JCN. It's on the way. Bill
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)