I need a very good condition early steering column, shaft, and turn signal assembly. I have a couple of trashed ones that are no good to me. Good condition to me means no slop in the bearings, clean, electrical connector in one piece, etc.
The '72-later years are quite different so just an early one please.
Thanks,
Marcus
I'm not sure if I have one with the shaft, but I'll look tomorrow.
Actually, the shaft isn't really an issue. It's the bearing slop and blinker switch that I'm most concerned with.
Thanks!
I have 3, none of which are absolutely perfect, but you could use 3 to make 1.
This first one spins freely, has a little bit of slop, switch feels good, but the wiring is a mess.
The next one spins freely, but feels like the bearings may need to be lubed, also a tiny bit of slop, switch is broken, and the wiring needs help.
The last one looks the best, but has no center. The switch feels good, and the wiring is nice with a good connector.
Since I'm trying to get rid of everything I have, I'm asking $25.00 each, or all 3 for $50.00, + shipping. Paypal is preferred.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)