Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB: Head Temp Sensor

Posted by: seventythree Sep 15 2012, 04:44 PM

I'm looking to buy a one-year-only CHTS for the 1973 2.0L application.
VW P/N 022 906 041 A
Bosch P/N 0280 130 017

I prefer new. Let me know what you have.

Thanks

PS,
I just tore the rubber gromet the fits around the wire and the engine tin. Any lead on where to buy a replacement would be appreciated.

Posted by: SLITS Sep 15 2012, 05:25 PM

One chance in hell you will find a new one. The 012 will work.

Posted by: pilothyer Sep 15 2012, 08:02 PM

QUOTE(SLITS @ Sep 15 2012, 06:25 PM) *

One chance in hell you will find a new one. The 012 will work.


agree.gif

However, you can get the "012" HTS and simply ad a 270 ohm 1/4 or 1/2 watt resistor in series with it..........Just know this, though, The minimum resistance to the "brain will always be 270 ohms regardless of the resistance offered by the original HTS. This "should not present a problem though, as the enrichment circuit looks at anything below 300 ohms to be a fully warmed engine.

Posted by: seventythree Sep 16 2012, 09:02 AM

QUOTE(pilothyer @ Sep 15 2012, 07:02 PM) *

QUOTE(SLITS @ Sep 15 2012, 06:25 PM) *

One chance in hell you will find a new one. The 012 will work.


agree.gif

However, you can get the "012" HTS and simply ad a 270 ohm 1/4 or 1/2 watt resistor in series with it..........Just know this, though, The minimum resistance to the "brain will always be 270 ohms regardless of the resistance offered by the original HTS. This "should not present a problem though, as the enrichment circuit looks at anything below 300 ohms to be a fully warmed engine.


Thanks for the tip, but I thought the 73 2.0L had the balast resistor from the factory.
Can you elaborate?

Posted by: 914Sixer Sep 16 2012, 08:13 PM

Go to autohausaz.com and look up 74 2.0 914. 012 are listed under fuel injection $12.35. Go to Radio Shack and buy 270 ohm resistor for under $2. Put the ends on the resistor to plug in. Heat shrink resistor to protect it. Not sure if the factory resistor is still available. Porsche's last price was around $55 if you just go to have the factory one. Resistor was always a plug in item.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)