So a few folks had asked about piecing out the late 2.0L kit I have available,
but rather than do that I have a bunch of other components Ill offer separately.
Brain for a 74 2.0L? $60
TB for a 73 2.0L SOLD
2.0L Intake runners (any yr) $40
Plenum 73-74 2.0L SOLD
Plenum 75-76 2.0L $50
wiring Loom for a 1.7L SOLD
Oil Fill Tower w/PVC (73-74 DJet) SOLD
Flashback valve (73-74 DJet) SOLD
MPS for a 73 1.7L $150
Distributor (w/trigger points) for a 73 1.7L $100
Fuel Pressure Regulator (any Djet) $25
Stacked elbow connector & connector 2.0L SOLD
Thermotime sensor 75-76 2.0L $30
Auxiliary Air Regulator (Djet) $75
Injectors 2.0L $20 per used, $50 per refurbished
(Witchhunter Performance is my neighbor)
Djet Brain Bracket SOLD
Cold Start Injector $25
EGR mount (late 1.8 & 2.0L) $15
Air injection spider pipe $30
Injector clamps $9.14
Throttle Body gasket $9.14
1.8L TB w/TPS $50
L-Jet Air Horn SOLD
Fuel Rails (All) $15 pair
L-Jet Cold start injector $20
L-Jet Fuel Pressure Regulator $35
1.8L Plenum SOLD
1.8L ECU $60
2.0L TPS (all yrs) $30
1.8L FI harness $60
1.8 AFM $60
EGR valve (late) $40
EGR piping 2 (late) $15
EGR piping 2 (late) $15
Fuel Tank Fittings $30
Theres more as well...
PM sent on 74 brain
air Plenum and the Throttle body.. 76244 zip
PM sent on the air box and throttle body
Pm on its way Rich.
I'll take the 1.7 wire loom. Thanks, mark
Updated!
~
Items added
I will take the stacked elbow connector - PM your PayPal address and I will make payment today - thanks
Brian
I will also take the D-Jet brain bracket if it is still available - thank you - PM me with total and shipping
Mr. Hotlanta (and any one else for which this applies)
You do not have to continue quoting the same post that has a gajillion pictures in it. A simple "Reply" or "Fast Reply" works fine and will not quote the entire post, pictures and all. In a classified ad, I think everyone knows what you're referring to without re-quoting the same stuff over and over again. Ordinarily it's not a problem, except when the reply your quoting has lots of pics in it. Then the pics are just repeated throughout the entire thread and it becomes very hard to read. I trimmed the ones that were in this thread already. Thanks. Back to your regularly scheduled chaos.
Thanks Gint!
PM sent on Stacked elbow connector 2.0L
Is the 1.8 harness a 6 pin AFM or 7 pin? This would be the second largest black connector. In the picture you posted, it is overlapping the brain connector.
I'm interested in it if it is 6pin.
Mike did I ever get back to you on this?
Free
Looking for a Fan, No broken fins? LMK
What's the P/N on the TPS?
I'll have the 2.0 stacked elbow and the 2.0 TPS
Lemme know your paypal so I can send your money back
Gotta get rid o' some stuff ...
If you dont see what your after ask
What's the Bosch part number on the CSV? Do you know if it works?
"Brain for a 74 2.0L?"
Rich, do you still have this ECU? Whats the PN...are you not sure what year it is for?
Jeff, I've led you down the garden path. I didn't realize this thread was a year and a half old when I posted on it. Sorry
Rich is still alive and well...he may still have these parts.
Thanks Jeff. Still alive & still have a too many parts hanging around, (BTW shoot me a PM am ready for that replacement harness) I just havent had much time to hang out here in "play land"
Hey Rich, I'll take the 2.0 TPS if still available. I'll send PM.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)