Ho Ho Ho!
This is the last batch of parts for sale.
I ship from Paypal payments and need complete addresses to complete shipping.
PM me for my PP email address.
Thanks!
John
Front Brake dust shield - $10
Working AAV's - $25 each - Guaranteed to work
914 2.0L 73/74 ECU - $200
2, 4 and 6MM shims - $75 for the set NIB
Gauge plate - $25 with 2 medium rubber gaskets
Aluminum lid rollers - $20
Redone light buckets - $50 for the set
3 Working OEM relays - Very clean $25
Crisp Rear trunk working light - $25
2.0L FI Gaskets $18 for both NIB
3 - NIB 2.0L Exhaust gaskets $8 for 3 in bags
2 - 2.0L exhaust copper gaskets - $3 for both
2.0L Rearview - Good shape - $25
Good quality flasher switch - $25
Nice 914 Speedo Assy - New O ring - $55
Nice and rare 911 Speedo Assy - New O Ring - Does not work with 914 speedo - Rare Brass body - $95
911 Rear lenses - $40 - one has a slight crack
911 Dizzy Cap - 3.2L - $30
914 2.0L Repop Fuch Acorn bolts - Good shape - 17 pieces - $68
Unused Mahle 2.0L air filter - $10
Clipped off ECU connector - $20
009 HTS - $25
Mahle Euro NIB 2.0L 8 to 1 compression Piston set with jugs, pistons, wrist pins and wrist pin snap rings - $914
1973 914 2.0L Split case with new case Bolts set - needs .020 line boring - GA0009772 - $300
914 2.0L Crankshaft and drive gears - $150 - Machined mains .010, rod journals are spec
914 20L Camshaft - $50
Yes, there are some items in there that someone may want that I didn't type out, see if you can find them and pay for shipping and they are yours. Interesting little things in the main pic.
THANKS!!
John
2, 4 and 6MM shims - $75 for the set NIB... what are these used for?
Shimming the trailing arms to correct sagging in the rear of the car, but good shocks and springs typically correct it. Economy in a shim till one can change out about $300 in parts needed.
Sometimes even with shocks and springs, there is a bit of shim needed.
Anyone want to add better comments?
John
Shimming trailing arm. Oh that what I thought you meant to say. I was inquiring of the packet of copper rings. What are those used for? Oh I think it's an o-ring in that plastic bag.
I could use new case bolts and the studs that hold the P/C s. Are those new and if so, how much?
Thanks
Hi John...........Please let me know the shipping on the following:
NIB Battery Clamp - $6, NIB Clutch Accordian Boot - $5, Rubber and steel CV boot and flange - $10 NIB, 3 Port working fuel pump $55.
Thanks in advance...............Jerry
PM'd you, Jerry!
Thanks,
J
Hey 0396,
Those copper rings are for a 2 liter exhaust manifold. Not a 1.7 or 1.8.
You need 2 more to do all 4 pipes. The case bolts are already sunk into the motor halves. I can't remove them. I am not sure who makes them, as they were already in the short block when I bought it.
Maybe Jonathan at GPR knows?
Thanks,
John
I would take the NOS 914 radio faceplate and the black 911 aluminum nuts.
Do you know how much shipping is to 29681?
Thanks
Carsten
"Yes, there are some items in there that someone may want that I didn't type out, see if you can find them and pay for shipping and they are yours. Interesting little things in the main pic."
cv boots, is that a clutch cable boot? and a 3 port fuel pump
do i win them? haha i am also interested in your fuch lug bolt repops..
let me know thanks, Dave
Hey Dave!
PP sent.
Thanks!
John
Hello Teeners,
If it doesn't ship by Monday, really latest Tuesday, as my dad Robert A Lewis, Sr said over Hiroshima, "There will be a pause while we bomb our target."
My Mom, his widow, had a stroke and I will be out of town until 12/2.
Thanks to all, and you have 3 days to pick and pay. I send the last box out Tuesday after my freaking root canal.
Thanks!
John
Shameless bump!
J
I'll take the Aluminum lid rollers - $20. PayPal OK?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)