Printable Version of Topic

Posted by: KELTY360 Dec 4 2012, 02:32 PM

I'm looking for a friend who has Weber 44s on a flathead Ford. He needs a body for parts. Let me know what you've got. thanks.

Posted by: KELTY360 Dec 6 2012, 11:59 PM

Posted by: ThePaintedMan Dec 7 2012, 10:45 AM

Doh! Just sold two bodies to JRust. He might not need one of them, maybe you might contact him?

Posted by: KaptKaos Dec 7 2012, 11:08 AM

I might have one. I will check tonight and get back to you.

If I recall correctly, however, it has some broken castings. I forget where. Will check regardless, but don't get your hopes too high. :-)

Posted by: rhodyguy Dec 7 2012, 11:18 AM

by 'top', is this what you mean? if not find an exploded parts diagram and get the item #. shame to ruin what could be a reusable core for one piece.


Attached thumbnail(s)

Posted by: KELTY360 Dec 7 2012, 08:58 PM

Thanks guys. What I'm looking for is the top plate that the velocity stacks attach to. The fitting to the side was cracked by someone trying to screw an SAE fuel line into a metric fitting. The fitting was repaired and is functional but my buddy is trying to upgrade appearance.

Posted by: rhodyguy Dec 8 2012, 09:55 AM

top plate...if someone has a ratty/fuzzy core, box-o weber stuff, as long as the inlet is good and the float hinge pin area is good. marc's buddy will be in bidness.

k