Printable Version of Topic

Posted by: ConeDodger Dec 8 2012, 02:01 PM

When I was young and naive, I bought this from AA. I still buy from AA when I have to and the price is right, but let's just say I'm not young and naive. George sells it for $865.15 + tax and delivery. (don't ask, I used to make a lot of money)

It is listed in the catalog as a Euro High Performance Pressure Sensor 914 1970-1976 and it is supposed to be the Euro spec MPS. When I bought my car it ran like and I threw some parts at the problem until I finally gave up and put Dellorto carbs on it. This has perhaps 2-3 hours of running time on it and maybe 6 months bolted in place before it was relegated to a box on a shelf. It isn't as pretty as it was when I bought it but it will hold vacuum for as long as you want and the seal on the adjustment screw is intact. My loss is your gain, I will sell it for $250 + shipping. That's less than half George's price.


Attached image(s)

Posted by: ConeDodger Dec 10 2012, 11:41 AM

100 peeks and no one wants it? Baloney! I know how many of you DJet guys need this or will soon enough... Dropped the price!

Posted by: Cap'n Krusty Dec 10 2012, 04:20 PM

Interesting. What's the part number stamped on the case?

The Cap'n

Posted by: ConeDodger Dec 10 2012, 05:25 PM

0280100043

039906051

Not sure that is relevant though. I think AA has them rebuilt to Euro spec, which would leave the host case part number in place.

Posted by: 914Sixer Dec 11 2012, 09:18 PM

Rob,
Part numbers are for 2.0 D-Jet.

Posted by: ConeDodger Dec 11 2012, 10:03 PM

Mark, he rebuilt it to 'euro' spec supposedly... We had an LM-1 on it after it was installed and it isn't 'freakishly' rich. It ran great actually with this on the motor.

Posted by: ConeDodger Dec 15 2012, 10:06 AM

I put it on Ebay. $200... Somebody could snatch this for a very good price!