Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ fs freshly powdercoated engine mounts

Posted by: 70-914nut Feb 6 2013, 03:27 PM

just coated and thought i would pass on a good deal.

Posted by: 70-914nut Feb 9 2013, 09:05 AM

ttt

Posted by: 70-914nut Feb 17 2013, 02:06 PM

ttt

Posted by: lonewolfe Feb 20 2013, 02:53 PM

Are these for an early or late engine bar setup?

QUOTE(70-914nut @ Feb 6 2013, 01:27 PM)

just coated and thought i would pass on a good deal.

Posted by: bdstone914 Feb 20 2013, 10:38 PM

Those plates work with both early and late engine bars. They are also used at the trans mounts in the rear for all years . It is the cupped washers that are different on an early cross bar. They have a notch in the early ones to clear the engine bar.

this post shows the complete hardware for engine or trans mounts.

http://www.914world.com/bbs2/index.php?showtopic=203931

Bruce

Posted by: euro911 Feb 21 2013, 12:09 AM

Those are for tail-shift outboard engine support bars (70 ~ 72). Side-shift engine support bars have rubber mounts at the engine and the outboard mounts are 'U' channel type.

They can be used on all years for rear transaxle OEM mounts.

Don't use outboard rubber mounts on engines using side-shift style engine mount bars.