Printable Version of Topic

Posted by: hot_shoe914 Feb 7 2013, 11:34 PM

I have a set of heads that are ready to go. These were going on my 200HP motor I was going to build but I am going a different direction so the heads are for sale.

Heads are complete and ready to go needing nothing. They have 46 x 38 valves matched to intakes. Double tension springs, new guides. Perfect for that monster motor you want to build.

$1500.00 plus shipping.

Posted by: hot_shoe914 Feb 7 2013, 11:36 PM

Posted by: hot_shoe914 Feb 9 2013, 08:03 PM

I purchased these heads from heeltoe914 (Leamon). I will check with him and see who did the work on them. They were for his big horse power motor he was building until he bought his race car.

Posted by: hot_shoe914 Feb 11 2013, 07:50 PM

Nobody needs a great set of heads?

Posted by: nfkk Feb 12 2013, 12:48 AM

Bore?

Posted by: Mark Henry Feb 12 2013, 07:58 AM

I'd say standard 94/96mm....103mm bore would be hitting 3 of the stud holes

Posted by: rwilner Feb 12 2013, 08:31 AM

what size is the spark plug thread (M14 or M12)?

Posted by: hot_shoe914 Feb 12 2013, 09:27 AM

Standard bore, for use with 94/96 mm pistons.

Posted by: r_towle Feb 13 2013, 06:20 PM

I will go $500.00

Rich

Posted by: hot_shoe914 Feb 13 2013, 11:18 PM

You'd spend more than that to get a set reworked, not to mention parts, and a set of cores to start with. Thanks for the offer but I will pass. Not a fire sale, I don't have to get rid of them, just have different plans, but can still use these if need be.

Posted by: hot_shoe914 Mar 6 2013, 11:08 PM

Posted by: hot_shoe914 Mar 15 2013, 08:16 PM

Posted by: wildman Mar 18 2013, 06:27 PM

Could you provide a little more information? Chamber size, plug size, any cracks around the spark plug holes or in the exhaust ports, etc. also did you ever find out who did the work?

Posted by: hot_shoe914 Mar 18 2013, 07:46 PM

There are no cracks anywhere on the heads and they have never been run since being built. Work was done by European Motorworks in Hawthorne, Ca. I have not cc'd the heads but I will see if I can get chamber size for you.

Posted by: hot_shoe914 Mar 24 2013, 06:11 PM

These are still for sale if anyone is interested.

Posted by: sean_v8_914 Mar 27 2013, 07:51 AM

im guessing 45cc

Posted by: hot_shoe914 Mar 27 2013, 07:35 PM

I'm not sure but I stopped by the shop today and my guy is going to cc them for me. Not real sure why it is THAT important, you can shim it to get what you need. Plugs are standard size.

Posted by: hot_shoe914 Apr 9 2013, 07:46 PM

These heads are still for sale. The only place you will get head quality of this kind for a reasonable price is on the 'Vegas strip!

Posted by: hot_shoe914 Apr 26 2013, 06:06 AM

Posted by: hot_shoe914 Apr 28 2013, 08:04 AM

Still for sale.

Posted by: hot_shoe914 May 3 2013, 06:13 AM

Posted by: hot_shoe914 May 14 2013, 07:36 PM

Still want to sell these. Any takers?

Posted by: hulken May 15 2013, 02:56 AM

Send me a good offer on pm

Posted by: hot_shoe914 May 15 2013, 07:31 AM

A pm has been sent your way with an offer.


Shoe

Posted by: hot_shoe914 May 18 2013, 03:35 PM

Still for sale.

Posted by: hot_shoe914 Jul 11 2013, 08:32 PM

Posted by: hot_shoe914 Dec 20 2013, 11:12 PM

These heads are still for sale. I now have the cc info on them. The chambers are at 55cc's and the step has been cut out of the cylnder head.


Shoe

Posted by: Woody Dec 21 2013, 08:41 AM

I have a set of heads I just sent out to have done. I don't really need another set and these are not quite in my budget but they should work well on the 2414 I am building. This is tempting.

Posted by: hot_shoe914 Dec 21 2013, 06:20 PM

Go for it Woody, they are just what you need.