Printable Version of Topic

Posted by: dfelz Feb 25 2013, 02:30 PM

Anyone have one they ended up not using or have good working condition one laying around not in use...? Let me know your price in your reply by either PM or post on thread. Thanks!

Posted by: euro911 Feb 25 2013, 03:43 PM

They're pretty cheap at Pelican. They carry two different pressure ratings:

80 psi (VDO-360025) $43.50

150 psi (VDO-360004) $44.95

http://www.pelicanparts.com/catalog/shopcart/9144/POR_9144_ELgage_pg2.htm#item14

Posted by: dfelz Feb 25 2013, 03:53 PM

Thanks mark, I realize they are readily and available and someone cheap, but i figured i would ask on here first to see if i could get it for even less... on a tight budget...

Posted by: 914Sixer Feb 25 2013, 06:57 PM

Might be cheaper on E-Gauge.com

Posted by: jhora Feb 25 2013, 09:13 PM

David...I have a good used one...0-80psi $25 shipped

Posted by: jhora Feb 25 2013, 09:20 PM

better pics

Posted by: euro911 Feb 25 2013, 11:51 PM

http://www.egauges.com/

Posted by: dfelz Feb 26 2013, 01:10 AM

Sweet! Just a question, is there a difference for when the 150 should be used over the 80??? is one for the /6 or something??? i have a /4 - 1911cc

But since at the moment i dont see why the 80psi wouldnt work for me i will take it! ill PM you my mailing address in exchange for your paypal address!

Thanks

Posted by: dfelz Feb 26 2013, 11:22 AM

jhora, I will no longer be purchasing yours since bruce, who is local has a few at both psi levels and offered them for cheaper. Apparently i also need to pick my gauge first since the sender is dependent on that. But thank you very much for your offer and sending the pics right away. good luck

Best