Looking for 2 lower(not upper) lower spring perches for rear stock Boge shocks. The metal cups that support the rear coil springs. These rest on the beveled outer edge of the shock about 5 inches from the bottom and the inside diameter is around 46mm (1 13/16). The older koni lower perches are too big in internal diameter to rest on the beveled edge of the Body of the Boge shock. Thanks Bill (704)829-0976 billywhitesides1@aol.com
Bruce @ bstone914 will have what you need.
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)