I am parting out a 74 with a lot of rust issues.
Good are:
Front painted bumper with good top and bumperettes $250. No dents or damage.
SOLD A/C $400, includes lines, condenser, under dash unit, wire harness
Tinted door glass set $100, will sell individually.
SOLD
Door panels and pockets $200 for both sides, will split up
Lower dash, no cracks, $75
Seat belts $75
Gauges and switches $15-$50
Console heater lever $30
Interior trim A pillar covers $30/pr
SOLD
Good fenders, front and rear panels.
1.8L engine $300 as is. Compression of 100, 110, 125, & 125. No carb or injection.
More pics to follow.
Ask about other parts or metal section to cut out.
Bruce
Attached thumbnail(s)
Bruce.
I'll take the long block if the heads are good and if the case is in good shape.
call me tomorrow....it's Rob in Glendora.
Rob,
I need your phone number.
Call me tommorrow
951 five three six 7478
Bruce
Bruce,
Sent a PM for the Heads if you are willing to part out.
My phone No. is in the PM along with another request.
If you can get the swing arms, bring them to the G&R.
sail trim with studs?
quarter vent windows if the rubber is good
thanks
any foglite grills with lights?
One fog light with a broken lens and one grill that is in ok shape.
I have other fog lights and some so so grills.
Bruce
gonna be bringing some of the lot to the GnR?
Looks like it still has the rear valence. What kind of condition is that in?
do you have any pics of directly behind the car?
Rear end shots.
Valance needs some dent work but no broken tabs or cracked metal.
$50 as is.
Attached thumbnail(s)
I am looking for a front valance for a porsche 914
The thing under the front bumper
I'm at rotary914@yahoo.com
Thanks, Steve
I would be interested in:
Window winders if they are factory stock.
Driver side rubber that hold the top in the trunk.
Right rear red/white lens with no cracks.
1 smooth working door jam switch + the rubber seals if they are nice.
Passenger seat belt if it pulls out easily.
Basket weave seat cusions with no rips or tears (black).
steuspeed@hotmail.com
I'm very interested about the front bumper assembly, I live near prescott AZ, and would b willing to pick up. Give me a call
714-305-7480
Bruce I would be interested in the speedo if it works and the trip reset parts are there.
I'm in for the gauges. PM sent
Hello
I am looking for a front Valance for my 72 914 - the long black piece that goes under the front bumper
I'm also looking for a Passanger Side Rear Turn Signal Lens - a european one (?) White Red and Orange
Thanks, Steve
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)