Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ 1975 1.8L - Parting out another one

Posted by: tweet Apr 24 2013, 01:06 PM

These are the parts I am keeping, need them for my project:

Front and rear windshield with defroster
Front and rear sway bars
Fresh air and heating tubes
Carpet
Wiring Harnesses
Center console assembly
Steering Wheel and shift knob
All Locks

The engine does turn and the electrical checks out okay. The fuel pump is gone and the gas tank was uninstalled, but available and complete.

I have posted prices in the thread. I am open to reasonable offers. Just let me know by pm.

BTW: everything still left on the yellow 1976 2.0L is now available. I have revised that ad.



thanks, dan


Attached thumbnail(s)
Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image

Posted by: charlesmac Apr 25 2013, 07:24 AM

pm sent on door panels. May be interested in tail light lenses and assemblies also. Shoot me back a price with and without.
thanks

Posted by: dfelz Apr 25 2013, 09:25 AM

how much for the side view mirror???

Posted by: porsche913b_sp Apr 25 2013, 01:17 PM

I am interested in the radio, if you can send additional pic and price to porsche913b_sp@yahoo.com

Thanks
Ted

Posted by: SchantzMD Apr 25 2013, 01:54 PM

Hi Dan,

I could use the 1.8L emblem, any idea on a price shipped to 92509?

Posted by: bradtho Apr 25 2013, 02:09 PM

I'm looking for a complete passenger side exterior door handle, both the latch and the zinc/gold locking mechanism thing. needs to still have the original white nylon cam.

I'm also looking for a very nice fresh air box. I'm only after the upper black plastic piece, I don't need the fan or any of that.

I'm in 98052 if you have both/either and want to give me a quote.

Posted by: ericoneal Apr 25 2013, 02:56 PM

I would like ALL of the trim around the back window and sail panels. Three pieces in all I believe. Please msg me with price and shipping. Thanks

Posted by: Mr. Olympic Blue 2 You Apr 25 2013, 05:04 PM

Interested in the back pad light if it has the chrome edge and isn't cracked..please PM if available with price and pic.

Thanks!
Andrew

Posted by: KENNY Apr 25 2013, 07:16 PM

Secon in line for the radio .drivers side floor mat how much .pm me please .

Posted by: vw505 Apr 25 2013, 07:44 PM

How much for the wheels?

Posted by: bulitt Apr 25 2013, 08:02 PM

Front Targa seal- the upside down U seal around the windshield. Price. If its not in VGC I will pass. thanks.

Posted by: 914runnow Apr 25 2013, 08:52 PM

Howdie ..back pad ..(3pcs)..behind seats??
Thanx Rx..
rexlindgren@yahoo.com...
do not need the light..

Posted by: tweet Apr 25 2013, 10:36 PM

QUOTE(vw505 @ Apr 25 2013, 09:44 PM) *

How much for the wheels?

set of 4 Mahle's with 2 so-so center caps $450 + shipping

Posted by: tweet Apr 25 2013, 10:37 PM

QUOTE(914runnow @ Apr 25 2013, 10:52 PM) *

Howdie ..back pad ..(3pcs)..behind seats??
Thanx Rx..
rexlindgren@yahoo.com...
do not need the light..

back pad needs cleaning, no tears - $175 + shipping

Posted by: tweet Apr 25 2013, 10:38 PM

QUOTE(bulitt @ Apr 25 2013, 10:02 PM) *

Front Targa seal- the upside down U seal around the windshield. Price. If its not in VGC I will pass. thanks.

seals are original, average condition, but the top overall is nice.

Posted by: tweet Apr 25 2013, 10:40 PM

QUOTE(charlesmac @ Apr 25 2013, 09:24 AM) *

pm sent on door panels. May be interested in tail light lenses and assemblies also. Shoot me back a price with and without.
thanks

door panels with armrests and storage - $200 pair + shipping
Door panels, armrests and pocket---SOLD

Below are pictures of the door panels after restoration.


Attached image(s)
Attached Image Attached Image

Posted by: tweet Apr 25 2013, 10:45 PM

QUOTE(bradtho @ Apr 25 2013, 04:09 PM) *

I'm looking for a complete passenger side exterior door handle, both the latch and the zinc/gold locking mechanism thing. needs to still have the original white nylon cam.

I'm also looking for a very nice fresh air box. I'm only after the upper black plastic piece, I don't need the fan or any of that.

I'm in 98052 if you have both/either and want to give me a quote.

I have a housing, both halves, I sanded in order to repaint the yellow over-spray $25 + shipping, daily driver condition

Not selling the locks


Posted by: tweet Apr 25 2013, 10:47 PM

QUOTE(porsche913b_sp @ Apr 25 2013, 03:17 PM) *

I am interested in the radio, if you can send additional pic and price to porsche913b_sp@yahoo.com

Thanks
Ted

radio works, presets do not flip the stations, Motorola, all buttons, knobs, and dials are present - $75 + shipping - SOLD

Posted by: rjames Apr 25 2013, 10:48 PM

Interested in all carpet pieces, interior door handles and back pad light if no cracks. Price?

Posted by: tweet Apr 25 2013, 10:49 PM

QUOTE(dfelz @ Apr 25 2013, 11:25 AM) *

how much for the side view mirror???

mirror, little chrome missing on bottom plate, authentic porsche - $50 + shipping

Posted by: tweet Apr 25 2013, 10:51 PM

QUOTE(rjames @ Apr 26 2013, 12:48 AM) *

Interested in all carpet pieces, interior door handles and back pad light if no cracks. Price?


not selling carpet, need it for my own project -
chrome interior door handles $30 + shipping
handle cups $10 + shipping

Posted by: tweet Apr 25 2013, 10:52 PM

QUOTE(SchantzMD @ Apr 25 2013, 03:54 PM) *

Hi Dan,

I could use the 1.8L emblem, any idea on a price shipped to 92509?

1.8L emblem $10 + shipping
SOLD

Posted by: tweet Apr 25 2013, 10:56 PM

QUOTE(ericoneal @ Apr 25 2013, 04:56 PM) *

I would like ALL of the trim around the back window and sail panels. Three pieces in all I believe. Please msg me with price and shipping. Thanks


sail trim - all plus shipping

long horizontal roll bar $45

verticals pair $65 - SOLD
horizontals pair $45 - SOLD
top shorts pair $35 - SOLD

Posted by: tweet Apr 25 2013, 11:02 PM

QUOTE(Mr. Olympic Blue 2 You @ Apr 25 2013, 07:04 PM) *

Interested in the back pad light if it has the chrome edge and isn't cracked..please PM if available with price and pic.

Thanks!
Andrew

has cracks, but is chrome edged

Posted by: euro911 Apr 26 2013, 02:36 AM

Dan, If they're decent (no rips or tears), would you consider selling the plaid material seat and set back/headrest inserts?(don't need the entire seat assemblies).

Posted by: ericoneal Apr 26 2013, 06:55 AM

Since I have no sail vinyl, I think I will only need the:

long horizontal roll bar $45
verticals pair $65

or whatever is shown in the image below, does this sound right?:

IPB Image

QUOTE(tweet @ Apr 26 2013, 12:56 AM) *

QUOTE(ericoneal @ Apr 25 2013, 04:56 PM) *

I would like ALL of the trim around the back window and sail panels. Three pieces in all I believe. Please msg me with price and shipping. Thanks


sail trim - all plus shipping
long horizontal roll bar $45
verticals pair $65
horizontals pair $45
top shorts pair $35

Posted by: tweet Apr 26 2013, 06:28 PM

QUOTE(porsche913b_sp @ Apr 25 2013, 03:17 PM) *

I am interested in the radio, if you can send additional pic and price to porsche913b_sp@yahoo.com

Thanks
Ted


Pictures of the radio. I also have the radio brochure. I posted a price. If you think it is too much, I'm open to offers.

Radio is SOLD

Literature still available, very good condition.


Attached image(s)
Attached Image Attached Image

Posted by: tweet Apr 26 2013, 06:30 PM

QUOTE(ericoneal @ Apr 26 2013, 08:55 AM) *

Since I have no sail vinyl, I think I will only need the:

long horizontal roll bar $45
verticals pair $65

or whatever is shown in the image below, does this sound right?:

IPB Image

QUOTE(tweet @ Apr 26 2013, 12:56 AM) *

QUOTE(ericoneal @ Apr 25 2013, 04:56 PM) *

I would like ALL of the trim around the back window and sail panels. Three pieces in all I believe. Please msg me with price and shipping. Thanks


sail trim - all plus shipping
long horizontal roll bar $45
verticals pair $65
horizontals pair $45
top shorts pair $35


Hi Eric,
Let me know what you decided on the trim pieces, 'cause, I am off from work tomorrow to uninstall them.

Posted by: tweet Apr 26 2013, 06:34 PM

More pics of the car


Attached image(s)
Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image

Posted by: tweet Apr 26 2013, 06:40 PM

QUOTE(euro911 @ Apr 26 2013, 04:36 AM) *

Dan, If they're decent (no rips or tears), would you consider selling the plaid material seat and set back/headrest inserts?(don't need the entire seat assemblies).

Hi Mark,
I really don't want to part out the seats. But, I am currently working on finding the correct upholstery materials. I've got a supplier for almost all of the leathers, vinyl, perlon, carpet, etc. Now I am going to look for the fabrics. I want to be able to offer restoration services, not just the materials.

Posted by: tweet Apr 26 2013, 06:41 PM

QUOTE(SchantzMD @ Apr 25 2013, 03:54 PM) *

Hi Dan,

I could use the 1.8L emblem, any idea on a price shipped to 92509?

"1.8" emblem SOLD

Posted by: tweet Apr 26 2013, 07:06 PM

QUOTE(charlesmac @ Apr 25 2013, 09:24 AM) *

pm sent on door panels. May be interested in tail light lenses and assemblies also. Shoot me back a price with and without.
thanks


Better pictures of tail lights.


Attached image(s)
Attached Image Attached Image

Posted by: tweet Apr 26 2013, 07:17 PM

QUOTE(vw505 @ Apr 25 2013, 09:44 PM) *

How much for the wheels?

Better pics of the wheels



Attached image(s)
Attached Image Attached Image Attached Image Attached Image

Posted by: montoya 73 2.0 Apr 26 2013, 08:41 PM

Those are FUCH'S.

Posted by: tweet Apr 26 2013, 09:00 PM

QUOTE(montoya 73 2.0 @ Apr 26 2013, 10:41 PM) *

Those are FUCH'S.


My bad, still learning.

Posted by: tweet Apr 26 2013, 09:28 PM

QUOTE(tweet @ Apr 26 2013, 11:00 PM) *

QUOTE(montoya 73 2.0 @ Apr 26 2013, 10:41 PM) *

Those are FUCH'S.


My bad, still learning.


Actually, I went back and looked at the spare and found the "Mahle" logo on the back of the rim. Also, it shows p/n of 914.361.015.00. So we can both let out a collective "Doh"! headbang.gif On the positive side, I now have a set of 4 "MAHLES" for sale. piratenanner.gif New Price is $450 OBO plus shipping

Posted by: ThePaintedMan Apr 26 2013, 09:52 PM

QUOTE(tweet @ Apr 26 2013, 11:28 PM) *

QUOTE(tweet @ Apr 26 2013, 11:00 PM) *

QUOTE(montoya 73 2.0 @ Apr 26 2013, 10:41 PM) *

Those are FUCH'S.


My bad, still learning.


Actually, I went back and looked at the spare and found the "Mahle" logo on the back of the rim. Also, it shows p/n of 914.361.015.00. So we can both let out a collective "Doh"! headbang.gif On the positive side, I now have a set of 4 "MAHLES" for sale. piratenanner.gif New Price is $450 OBO plus shipping


They're definitely Mahles. Also called "gas burners".

Posted by: mepstein Apr 27 2013, 05:46 AM

QUOTE(ThePaintedMan @ Apr 26 2013, 11:52 PM) *

QUOTE(tweet @ Apr 26 2013, 11:28 PM) *

QUOTE(tweet @ Apr 26 2013, 11:00 PM) *

QUOTE(montoya 73 2.0 @ Apr 26 2013, 10:41 PM) *

Those are FUCH'S.


My bad, still learning.


Actually, I went back and looked at the spare and found the "Mahle" logo on the back of the rim. Also, it shows p/n of 914.361.015.00. So we can both let out a collective "Doh"! headbang.gif On the positive side, I now have a set of 4 "MAHLES" for sale. piratenanner.gif New Price is $450 OBO plus shipping


They're definitely Mahles. Also called "gas burners".


- Baby gas burners. real gas burners are 5 lug, magnesium and sell ~$500 each.

Posted by: euro911 Apr 28 2013, 08:51 PM

QUOTE(tweet @ Apr 26 2013, 05:40 PM) *
QUOTE(euro911 @ Apr 26 2013, 04:36 AM) *
Dan, If they're decent (no rips or tears), would you consider selling the plaid material seat and set back/headrest inserts?(don't need the entire seat assemblies).
Hi Mark,
I really don't want to part out the seats. But, I am currently working on finding the correct upholstery materials. I've got a supplier for almost all of the leathers, vinyl, perlon, carpet, etc. Now I am going to look for the fabrics. I want to be able to offer restoration services, not just the materials.
No problem Dan. My wife wants cloth seat inserts, never thought about the plaids until I saw your post. Keep us apprised as to when you're going to start doing them popcorn[1].gif

Posted by: tweet May 7 2013, 08:04 AM

bump

Posted by: jesiv May 7 2013, 07:28 PM

How about the top targa pad?

Posted by: tweet May 7 2013, 08:13 PM

QUOTE(jesiv @ May 7 2013, 09:28 PM) *

How about the top targa pad?

Targa is in nice shape. We've had a lot of rain the past week and a half, and the seals are still usable, not dry rotted. Can't really say how long of a life is still left in them. all latches are intact. The headliner is still firmly attached. No broken corners on fiberglass shell. Original paint, faded to a soft black. No cracks on pad.
$200 + shipping (economy class, extra large package rate applies). The spots you see are not stains, rain drops.


Attached image(s)
Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image

Posted by: tweet May 17 2013, 07:33 PM

weekend bump

Posted by: craig downs May 18 2013, 10:13 PM

Do you still have the clock and if so how much?

Posted by: tweet May 19 2013, 10:34 AM

QUOTE(craig downs @ May 19 2013, 12:13 AM) *

Do you still have the clock and if so how much?

Hello Craig. The clock is not working. I am currently in the process of finding a professional to repair it along with some others I have.
-dan

Posted by: tweet May 19 2013, 10:37 AM

QUOTE(tweet @ Apr 26 2013, 08:28 PM) *

QUOTE(porsche913b_sp @ Apr 25 2013, 03:17 PM) *

I am interested in the radio, if you can send additional pic and price to porsche913b_sp@yahoo.com

Thanks
Ted


Pictures of the radio. I also have the radio brochure. I posted a price. If you think it is too much, I'm open to offers.

Radio has been SOLD

Posted by: dcecc1968 May 20 2013, 06:45 AM

Has the Sideview mirror been sold? If not, could you post a photo or two?
Thanks,
Don

Posted by: FrogMut May 20 2013, 11:29 AM

How much for the entire ebrake system from the handle back to the calipers?

How much for the back pad?

The two seats with rails tilt and all hardware?

Left mirror?

Back inside targa pad with silent blocks and rear mechanism to lock roof?




Posted by: tweet May 31 2013, 01:08 PM

weekend bump

Posted by: lonewolfe May 31 2013, 05:23 PM

How much for the front swaybar shipped to Oakland, CA 94605? I'm also interested in the dash pad. Is it still available and if so, how much are you asking?

PM sent

Posted by: Jgilliam914 Jun 2 2013, 06:17 AM

I am looking for the interior windshield trim piece that the sun visor clips get screwed into shipping to 52245

Posted by: stateofidleness Jun 2 2013, 10:41 AM

Are the 3 engine compartment seals in good condition? Front lenses cracked? If all in good condition, price shipped to 78266 please.

Thanks!

Posted by: tweet Jun 4 2013, 08:03 AM

QUOTE(rjames @ Apr 26 2013, 12:48 AM) *

Interested in all carpet pieces, interior door handles and back pad light if no cracks. Price?

Light is broken, not selling the carpeting.

Posted by: tweet Jun 12 2013, 01:20 AM

Updated list of parts that have been sold:

Roll bar pad
Door Panels - complete
Warts - assembly
Turn signal boots
All sail trim except long horizontal roll bar piece
Engine lid
Radio and faceplate


piratenanner.gif

Posted by: lonewolfe Jun 12 2013, 04:35 AM

What are you asking for the horizontal roll bar piece? Shipped to 94605?





QUOTE(tweet @ Jun 12 2013, 12:20 AM) *

Updated list of parts that have been sold:

Roll bar pad
Door Panels - complete
Warts - assembly
Turn signal boots
All sail trim except long horizontal roll bar piece
Engine lid
Radio and faceplate


piratenanner.gif


Posted by: cook_gary_d Jun 13 2013, 12:12 PM

hi i am gary cook
i am looking for rear sway bar link for 75/ 914 . please contact me if you have part
thanks cook_gary_d@sbcglobal.net

Posted by: tweet Jun 23 2013, 09:03 PM

bump

Posted by: teamgravy Jun 24 2013, 07:23 PM

QUOTE(tweet @ Jun 23 2013, 10:03 PM) *

bump

What type of intake on the motor? We need some HP for our Lemon?

Looking for dual carb setup.

Posted by: tweet Jun 24 2013, 07:32 PM

QUOTE(teamgravy @ Jun 24 2013, 09:23 PM) *

QUOTE(tweet @ Jun 23 2013, 10:03 PM) *

bump

What type of intake on the motor? We need some HP for our Lemon?

Looking for dual carb setup.

This is a bone stock '75 1.8L w/ original f.i. Horsepower comes from conversions. You are only as limited as your budget. Realistically, a carb conversion can start in the $3000-$5000, done correctly as a diy. The faster you want to go, the deeper your pockets must be.

Posted by: 75porsche914 Jun 28 2013, 01:26 AM

Very interested in your dash if its crack free? Also very interested in your drivers side storage compartment and lid and both drivers side and passanger side sun visors and rear chrome sail trim pieces.

Thank you

Peter

Posted by: 75porsche914 Jun 28 2013, 01:28 AM

If you still have them, very interestted in your front and rear sway bars.

Do you happen to have the tool bag and tools?

Thank you

QUOTE(75porsche914 @ Jun 28 2013, 12:26 AM) *

Very interested in your dash if its crack free? Also very interested in your drivers side storage compartment and lid and both drivers side and passanger side sun visors and rear chrome sail trim pieces.

Thank you

Peter


Posted by: tweet Jun 28 2013, 09:23 AM

QUOTE(75porsche914 @ Jun 28 2013, 03:26 AM) *

Very interested in your dash if its crack free? Also very interested in your drivers side storage compartment and lid and both drivers side and passanger side sun visors and rear chrome sail trim pieces.

Thank you

Peter

Hello Peter,
Please pm me your email address and I will send you pictures of what I have.
thanks, dan

Posted by: tweet Jun 28 2013, 09:24 AM

QUOTE(75porsche914 @ Jun 28 2013, 03:28 AM) *

If you still have them, very interestted in your front and rear sway bars.

Do you happen to have the tool bag and tools?

Thank you

QUOTE(75porsche914 @ Jun 28 2013, 12:26 AM) *

Very interested in your dash if its crack free? Also very interested in your drivers side storage compartment and lid and both drivers side and passanger side sun visors and rear chrome sail trim pieces.

Thank you

Peter


Car did not have the tool bag or tools.

Posted by: Hine62 Jun 28 2013, 09:45 PM

Any chance you have one complete seat belt bolt and washers that connect above the seat on the sail/roll bar?

Posted by: tweet Jul 7 2013, 08:27 PM

bump

Posted by: 75porsche914 Jul 14 2013, 02:09 PM

Interested in your rear chrome sail trime pieces and driver and passanger side sun visors.

Posted by: 75porsche914 Jul 16 2013, 01:01 AM

QUOTE(75porsche914 @ Jun 28 2013, 12:26 AM) *

Very interested in your dash if its crack free? Also very interested in your drivers side storage compartment and lid and both drivers side and passanger side sun visors and rear chrome sail trim pieces.

Thank you

Peter

Hey Dan, how much for the sail pieces please.Thank you chefpeteredwards@yahoo.com

Posted by: 914Pro Jul 18 2013, 01:54 PM

How much for the center console with the gauges?

Posted by: Evil914 Jul 20 2013, 10:06 AM

Did you sell the seats?

Posted by: Firstcar Jul 20 2013, 04:28 PM

Sent a PM about the steering wheel.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)