Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ F/S 4 Sets of Carb Manifolds for Dual port Webers or Dellorto's

Posted by: bdstone914 Apr 30 2013, 11:05 PM

I have a few pair of manifolds that fit dual barrel Weber or Dellorto carbs. $45 a pair.
They have been sandblasted clean inside and out. Note there are dual drilled types and single types.
There is one pair of short manifolds drilled for 1.7-1.8 heads and one set for 2.0L heads.
Both pair of tall manifolds are drilled for both patterns.
The tall ones are better on the high end and short ones better on low end performance.
I can hit them with the wire wheel to bring out a dull luster to the aluminum.
$45 a pair plus shipping. New ones are about $90 a pair at C B Performance.
Bruce

Attached thumbnail(s)

Posted by: draganc May 20 2013, 07:03 PM

You have a PM......

Posted by: draganc May 29 2013, 07:39 PM

QUOTE(draganc @ May 20 2013, 05:03 PM)

You have a PM......

Bruce, I have paypal-ed you the agreed amount on the 23th.
Can you confirm the funds and approximately shipping date?

Dragan

Posted by: draganc May 30 2013, 09:25 PM

I received the parts, as described, today.

Thanks!