Printable Version of Topic

Posted by: brant May 7 2013, 09:17 AM

I have a couple of spare MPS for a 1.7 Djet system
Here is the first one.
It has NO vacuum leak down and tests perfect
it is very clean
it has never been adjusted and retains the factory settings and seal
it has never been opened and is still factory riveted.

this is ready to bolt on

$185 shipped in the continental US

brant



Attached thumbnail(s)

Posted by: Kaduku May 7 2013, 11:03 AM

Are these interchangeable with a 1.8 with a D-Jet?

Posted by: brant May 7 2013, 11:22 AM

the 1.8 uses Ljet

the Djet MPS, can be tuned to run on any displacement, but there wasn't an MPS on Ljet (only if someone swapped out to Djet on a 1.8)

Posted by: Kaduku May 7 2013, 12:35 PM

QUOTE(brant @ May 7 2013, 10:22 AM)

Posted by: brant May 7 2013, 01:13 PM

That is completely possible.
Djet can be bolted onto a 1.8 and work well
its been done many times

ideally, the MPS would be tuned for the slight bump in compression
but the 1.7 and 1.8 are so close that it may not really need much tuning.... (maybe none?)

geoff would know probably from his experience in first hand tuning MPS for different applications.


I've had him tune 1.7 units with the wavetech for 2.0 motors
all of the units should be using the same diaphram, its just the settings that are changed between the 2.0motors and the 1.7 motors.

brant

Posted by: brant May 11 2013, 07:18 AM

bump

Posted by: brant May 14 2013, 01:23 PM

bump

Posted by: luskesq May 14 2013, 05:38 PM

Brant, I received one of the other ones from you last week. Although you claimed it wasn't as "nice" as the one you are showing here, it was very nice, zero vacuum leakage and electrically good. Thanks for the prompt and speedy shipment.

Keith

Posted by: brant May 15 2013, 10:10 AM

QUOTE(luskesq @ May 14 2013, 05:38 PM)

Posted by: brant May 22 2013, 01:42 PM

another bump

Posted by: brant Jun 23 2013, 08:28 AM

bump

Posted by: brant Jun 27 2013, 01:58 PM

no one is in need of a great 1.7MPS?