***Not for street use because there's no hand/emergency brake***
THAT SAID; this is part of our inventory reduction sale. We can currently make up about 3-4 sets of these rear 911 calipers without spacers (depending on how 911 rear sales are going and... they're going well so hurry).
These would have the proper bias for a larger 911 48mm front piston. Here's what you would get:
15% larger pad (same as 911 or 914-6)
15% larger piston (same as 911 or 914-6)
Bolt on upgrade for the rear to match the 48mm pistons in larger 911 front calipers
w/o the spacers these calipers will bolt up to a stock 914 or 914-6 rear rotor (if you're five lug)
"Perfect" bias match for the 48mm front pistons and not too large (E.G.: bolting an early 914 front on the rear).
$99.00 per set plus shipping.
Eric, are these the ones we are talking about?
This is a really good deal. I bought a set a while back and just put them on my car this week. It's a nice upgrade for a system w/non vented rotors that won't require a lot of messing around bending new hard lines. The inlet on the caliper lines up perfectly with the new stainless rear hard lines that Eric also sells.
Down to 1-2 sets now.
It's not that hard to convert to a 911 emergency brake, than these calipers would also be great for the street too!!
I am in for 1 set
These are sold out.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)