Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: Blaupunkt Radio Faceplate
Posted by: gcrotvik Jun 24 2013, 09:38 AM
--- Found One, Thanks Chris ---
I am looking for a through dash faceplate that will fit a 74 Blaupunkt Frankfurt radio. If no one has one for sale, I am willing to pay someone a small fee to borrow a good example so I can have a template made. I have access to a CNC machine and I will have one (several) made. I will return the borrowed original unharmed.
Some may say that AA has these, but as far as I can tell all you get is a blank from AA that you need to cut the holes in.
See picture below for clarification.
Thanks!
Greg
Attached image(s)
Posted by: ChrisG914 Jun 24 2013, 09:47 AM
I am looking for a through dash faceplate that will fit a 74 Blaupunkt Frankfurt radio. If no one has one for sale, I am willing to pay someone a small fee to borrow a good example so I can have a template made. I have access to a CNC machine and I will have one (several) made. I will return the borrowed original unharmed.
Some may say that AA has these, but as far as I can tell all you get is a blank from AA that you need to cut the holes in.
See picture below for clarification.
Thanks!
Greg
Greg, I have a metal face that you can use however I suggest that you snd me the measurement of the opening as mine was too small for the two Blaupunkt rradios I have. If it is correct for yours I will send it to use.
Posted by: Jeff Bowlsby Jun 24 2013, 02:40 PM
I have these three available:
Attached image(s)
Posted by: gcrotvik Jun 24 2013, 03:48 PM
Hi Jeff,
My request/picture confused you (and most likely others). See the new picture above. I need the dash plate that gets covered with OE vinyl to match the rest of the dash. I am however interested in the top faceplate shown for another radio. PM me a price.
Thanks,
Greg
Posted by: Kaduku Jun 24 2013, 04:53 PM
I am looking for a through dash faceplate that will fit a 74 Blaupunkt Frankfurt radio. If no one has one for sale, I am willing to pay someone a small fee to borrow a good example so I can have a template made. I have access to a CNC machine and I will have one (several) made. I will return the borrowed original unharmed.
Some may say that AA has these, but as far as I can tell all you get is a blank from AA that you need to cut the holes in.
See picture below for clarification.
Thanks!
Greg
I have one. I will send you a pic.
Posted by: gcrotvik Jun 24 2013, 05:46 PM
I am looking for a through dash faceplate that will fit a 74 Blaupunkt Frankfurt radio. If no one has one for sale, I am willing to pay someone a small fee to borrow a good example so I can have a template made. I have access to a CNC machine and I will have one (several) made. I will return the borrowed original unharmed.
Some may say that AA has these, but as far as I can tell all you get is a blank from AA that you need to cut the holes in.
See picture below for clarification.
Thanks!
Greg
I have one. I will send you a pic.
Thank you! Send it to grotvik@sussmanshank.com.
Regards,
Greg
Posted by: ChrisG914 Jun 24 2013, 06:34 PM
Greg, That is what I have so if you send the measurements of the rectangle I will measure mine and confirm it is correct. email me at stophos at aol dot com.
- Chris
Posted by: tweet Jun 24 2013, 07:08 PM
Greg, I am looking for one of those. Please let me know if you could make two, and I'll buy the spare one.
thanks,
dan
Posted by: Kaduku Jun 24 2013, 08:24 PM
I am looking for a through dash faceplate that will fit a 74 Blaupunkt Frankfurt radio. If no one has one for sale, I am willing to pay someone a small fee to borrow a good example so I can have a template made. I have access to a CNC machine and I will have one (several) made. I will return the borrowed original unharmed.
Some may say that AA has these, but as far as I can tell all you get is a blank from AA that you need to cut the holes in.
See picture below for clarification.
Thanks!
Greg
I have one. I will send you a pic.
Thank you! Send it to grotvik@sussmanshank.com.
Regards,
Greg
Just sent 4 pics. I can also throw in a basketweave cover that I had laying around. As you can see this is original.
Posted by: gcrotvik Jun 25 2013, 08:20 AM
See new pictures above. The opening in the faceplate needs to match (+ a MM or two) the bezel size of 94 MM (3 11/16) wide x 42 MM (1 5/8) tall. I do not have the post width at this time. I will try to get the post width tonight.
Thanks,
Greg
Posted by: gcrotvik Jun 26 2013, 07:11 AM
Found one! Thank you Chris!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)