Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS 911 Stubs / Wheel Studs / Misc.

Posted by: jaxdream Jun 26 2013, 03:01 PM

[attachmentid=394
877][attachmentid
=394881] Attached Image [attachme
ntid=394883][atta
chmentid=394889]

Parts that I will not be using , went a different route. Post here that you will buy them , then send me a PM with your name and address and I will PM you my PayPal addy and pay using the " gift " pay . Time stamp in the pm will be first come first serve . Also PM with any questions and I will try my best to respond.
These parts also posted on the Bird board .
Jack

1. - 108mm early 911 Wheel stub 901.332.232.00 4 10mm X 1.5mm bolt 2 stud
$ 125.00 shipped SOLD
2. - 108mm early 901 Trans stub 901.332.209.15 4 10mm X 1.5mm bolt 2 stud
$ 125.00 shipped SOLD
3. - 100mm Sc 911 Wheel stub 923.332.232.01 ( 42Cr is the only cast number )
6 bolt 8mm X 1.25mm - $125.00 shipped
4. - 23mm ATE master cylinder not sure of application , no numbers just 23 and
ATE cast on body - $50.00 shipped Sold
5. - 914 CV gaskets only have 3 - $10.00 shipped
6. - Fiberglass flares , again decided not to use , never mounted still in the box I
got them in ( 2005 ) - $175.00 shipped SOLD
7. - Precise SS Braid brake lines marked DOT Approved for EARLY 70-71 914 and
911/912 they only have the clip slot on one end not both , that's why they
early - YOU decide if you can use them - New in pack not removed - $30.00
shipped Sold
8. - Standard wheel studs - see pic 44m long - 20pcs - $ 30.00 shipped Sold
9. - Longer wheel studs - see pic 65.5mm long -20pcs - $ 55.00 shipped Sold
10. - Set of locks with original key plus an aftermarket key . These are driver
quality door handles and the frt trunk handle needs a repaint . They all work
good with the occasional wiggle needed - but they all are keyed to that one
key ( came off a '72 ) $ 100.00 shipped Sold

Attached thumbnail(s)

Attached image(s)

Posted by: tweet Jun 26 2013, 03:34 PM

QUOTE(jaxdream @ Jun 26 2013, 05:01 PM)

[attachmentid=394
877]

[attachmentid
=394881] Attached Image

[attachme
ntid=394883] Attached Image

[atta
chmentid=394889]

Parts that I will not be using , went a different route. Post here that you will buy them , then send me a PM with your name and address and I will PM you my PayPal addy and pay using the " gift " pay . Time stamp in the pm will be first come first serve . Also PM with any questions and I will try my best to respond.

Jack

1. - 108mm early 911 Wheel stub 901.332.232.00 4 10mm X 1.5mm bolt 2 stud
$ 125.00 shipped
2. - 108mm early 901 Trans stub 901.332.209.15 4 10mm X 1.5mm bolt 2 stud
$ 125.00 shipped
3. - 100mm Sc 911 Wheel stub 923.332.232.01 ( 42Cr is the only cast number )
6 bolt 8mm X 1.25mm - $125.00 shipped
4. - 23mm ATE master cylinder not sure of application , no numbers just 23 and
ATE cast on body - $50.00 shipped
5. - 914 CV gaskets only have 3 - $10.00 shipped
6. - Fiberglass flares , again decided not to use , never mounted still in the box I
got them in ( 2005 ) - $175.00 shipped
7. - Precise SS Braid brake lines marked DOT Approved for EARLY 70-71 914 and
911/912 they only have the clip slot on one end not both , that's why they
early - YOU decide if you can use them - New in pack not removed - $30.00
shipped
8. - Standard wheel studs - see pic 44m long - 20pcs - $ 30.00 shipped
9. - Longer wheel studs - see pic 65.5mm long -20pcs - $ 55.00 shipped
10. - Set of locks with original key plus an aftermarket key . These are driver
quality door handles and the frt trunk handle needs a repaint . They all work
good with the occasional wiggle needed - but they all are keyed to that one
key ( came off a '72 ) $ 100.00 shipped

I'll take the brake lines

Posted by: racerbvd Jun 26 2013, 09:48 PM

Are you open to any trades for the flares??

Posted by: jaxdream Jun 26 2013, 10:44 PM

QUOTE(racerbvd @ Jun 26 2013, 07:48 PM)

Are you open to any trades for the flares??

Not at this time , I have most every thing to get my project going , money being the biggest obstacle

. Thanks for the offer , they are fairly thick and untouched.

Jack

Posted by: Mr. Olympic Blue 2 You Jun 26 2013, 11:46 PM

2nd in line for the brake lines, really could use these,
Andrew

Posted by: Mr. Olympic Blue 2 You Jun 27 2013, 10:46 PM

Payment for the brake lines sent..thanks again Jack!
Andrew

Posted by: Mr. Olympic Blue 2 You Jul 1 2013, 08:42 PM

Received the lines today...everything as described and were just what I needed.
Thanks Jack!

Posted by: jaxdream Jul 1 2013, 10:34 PM

Great , glad that they will work for you.

Jack

Posted by: jaxdream Jul 7 2013, 08:09 AM

Bump.....

Jack

Posted by: jaxdream Jul 20 2013, 08:19 AM

TT......

Jack

Posted by: jaxdream Jul 29 2013, 06:40 PM

TT again...
Jack