NOS Aluminum ST/RSR NOS Blau oil cap, also used on several other Porsche (race) cars. The caps are 86mm outside diameter and have a cork seal.
It comes with a 1.5 inch fillerneck so you can fab your own ST/RSR filler mouth on your oil tank. (These necks are 80 mm outside diameter)
+
New Polished Stainless Steel Fuel Cap 110 mm for Centerfiller tank application, thru the hood or under the hood. (New production). Comes with a 100 mm (outside diameter) filler neck of about 3 inches to weld on the fuel tank for an under hood application, or you can extend it to a thru the hood length yourself.
$300 shipped in CUSA
Here is the finished product with .75 spacer welded on to the bottom and a GT handle
Bump to the top
Would you consider splitting the pair? I am interested in the fuel filler and cap. PM me if you would consider!
Thanks,
Thomas
PM sent
Here is the thread where Ron S put one of these on his car.
http://www.914world.com/bbs2/index.php?showtopic=192638&hl=GT+handle
David
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)