Printable Version of Topic

Posted by: Milsha12 Aug 13 2013, 09:07 AM

UPDATE - SOLD!!

Hi everyone,

I finally gave up on my restoration project after consulting with several experienced 914 guys. I want the parts to go to good homes, so if you need any parts, please let me know. Most parts are stock to the best of my knowledge.

I will be selling THE WHOLE LOT VERY SOON, so if you need anything, LET ME KNOW ASAP!!!

I believe the engine is 1.7 L - it runs good, with stock fuel injection system. I would rather not take parts off the engine, so the engine (or engine and transmission) should be bought as one unit. SOLD - Thanks Skip!

Transmission is good except first gear is not usable. SOLD - Thanks Skip!


Front bumper pad is okay, some ripples, (see pictures and prices in this thread) and I have an extra one that is in really good shape. One pad SOLD (Thanks Dennis), one still available.

The interior is in excellent shape, minus a few missing pieces like door panels. Stock radio, upper and lower dash pads, seats, rear pad, center console, gauges, knobs, etc. are all in great condition. Extra lower pad and extra vent deflectors also available. (see pictures and prices in this thread)

I have new emergency brake cables and refurbished front calipers still in packaging.

I have an extra front trunk lid in decent shape (needs some ding repairs), the front trunk lid on the car is in good shape (besides the paint), and the rear trunk lid is pretty good with the exception of a ding by the latch. (see pictures and prices in this thread)

Tailight, turn signal, and marker lenses are all in pretty good shape, plus I have some extras in lesser good shape. (see pictures and prices in this thread)

I have an extra gas tank plus the one in the car.

I have an extra door window, triangle windows, and rear window plus the windows in the car.

I have two targa tops. One is in decent condition but has some small chips out of the rear edge. The other has paint peeling off all over, but otherwise still fits up on the car well.

Doors have minimal rust. Door handles are good. Door handles are SOLD (Thanks Dan!)

Everything else on the car is available, plus some other goodies in boxes. (some parts are now SOLD)

Please post or PM me with any requests. I have not put any prices on all of these items yet. Let me know what you need, I can provide pictures and condition, and we can agree on a price.

Pickup is welcome if you are local, I can ship items if needed, but it may not be feasible for the larger pieces (I can check based on your zip). All prices are not including shipping unless stated as "shipped" and there are no handling fees. Buyer pays actual shipping. Cash is preferred if picking up. For shipped items, we can work out paypal or paper methods if needed.

I just hope these parts can help others with their projects so we can keep more 914s on the road!


Attached thumbnail(s)

Posted by: Mblizzard Aug 13 2013, 09:32 AM

I would be interested in the seat belts. I can't pick up but they should be an easy flat rate ship. I will pay all Paypal fees.

Posted by: euro911 Aug 13 2013, 10:07 AM

Were the 'experienced 914 guys' members on this forum?

Most 914s have some rust repairs that are needed. Just curious what and where the damage is that makes it not worth restoring?

Posted by: etcmss Aug 13 2013, 11:49 AM

so what do you want for the whole thing?

Posted by: Milsha12 Aug 13 2013, 10:46 PM

I bought it with full intentions to restore it - I believe any car is restorable if you have and are willing to provide some combination of skills, money, and time. It became apparent that I don't enough of any of those to make it work for me.

I thought the car could be saved and someone else could restore it, so I have had it on Craigs List for months. Had several calls asking for more pictures or details, then no return calls after sending them.

3 guys that have a lot of experience with 914s (at least one is a member of this forum, if not all of them) looked at it and all agreed that the deterioration in the longitudinals, inner rockers, rear quarter panels, front driver's fender, and front bumper mounts (which is as far as I dug into it) were really bad. The hell hole is not that bad, but is pretty thin. The batter tray is gone. The left rear trunk hinge is broken off the body. The rear trunk floor has pinholes. The front end has a small bend from a minor collision.

Is it do-able? Sure, maybe, but not for me. I love 914s, so I'll probably buy one again some day.

Hopefully these parts can keep some good 914's on the road and looking good so those of us who appreciate them can enjoy them.

Posted by: Milsha12 Aug 13 2013, 10:51 PM

I'm asking $1500 $800 $500 $300 for the [remaining] entire lot (pickup only, Sterling Heights, Michigan). If someone thinks they can restore it, I would be glad to sell it all to them so they can try to save it from being parted out. Otherwise, maybe someone wants to buy it for some of the parts and sell the rest (maybe to fund their project).

As I sell off parts, I will lower the price until the lot sells.

Posted by: Milsha12 Aug 13 2013, 11:02 PM

Pictures of (2) Front Rubber Bumper tops available

The straighter one is SOLD (Thanks Dennis!)

The one pictured near the winshield with ripples in center is still available - $75 + shipping (about $110 total, depending on your location)




Attached thumbnail(s)

Posted by: euro911 Aug 13 2013, 11:26 PM

OK, just wanted to make sure you received sound advice. I can understand not wanting to sink a lot of $ into something you can't fix on your own ... BTDT, bodywork isn't one of my strong points and can become very expensive

There are some guys out here that do some phenomenal work though. They have the energy, knowledge, skills and time to tackle some pretty far-gone specimens with great success.

Don't give up - there are still some good candidates out there.

Posted by: Milsha12 Aug 14 2013, 01:00 PM

Picture of radio, price is pending functional test to ensure it works well, but I'm not doing that unless someone wants it.

If interested, send me a PM.


Attached thumbnail(s)

Posted by: nmorrm Aug 15 2013, 12:07 AM

I am interested in the rubber seal around the rear trunk lock if it is in reasonable shape. Let me know.
Thanks.

Posted by: dfelz Aug 15 2013, 01:58 AM

Sent a PM yesterday, but haven't received a response yet

Posted by: Milsha12 Aug 15 2013, 05:56 AM

Sorry, I've had a lot of requests, and I have a day job, too, so I'm doing my best to get back with everyone in a timely manner. I'll be sending you a PM on your parts shortly.

Posted by: Milsha12 Aug 15 2013, 10:01 AM

vent controls ($20) (SOLD - Thanks Rob!)

Fasten seatbelt light ($15)


Attached thumbnail(s)

Posted by: Milsha12 Aug 15 2013, 10:43 AM

Sun visors - $25

SOLD - Thanks R8CERX!!


Attached thumbnail(s)

Posted by: Milsha12 Aug 15 2013, 01:19 PM

Parking brake / emergency brake / e-brake cables, mfg. by OEM Gemo, purchased new about 5 years ago, still in bags - $60 shipped in the US for the pair or $35 shipped in US for one (UPDATED PRICE again)


SOLD - Thanks Jim!


Attached thumbnail(s)

Posted by: Milsha12 Aug 15 2013, 01:22 PM

Extra trunk lid, no rust, but has some small dents, no Porsche emblem - $40 (local pickup only)


Attached image(s)

Posted by: Milsha12 Aug 15 2013, 01:27 PM

Door handles and steering lock, with matching key - $60 SOLD (Thanks Dan!)


Attached thumbnail(s)

Posted by: Milsha12 Aug 15 2013, 01:36 PM

Side marker lights - one crack at top of driver side lens - $40 (set)

SOLD!! - Thanks, Brad!


Attached thumbnail(s)


Attached image(s)

Posted by: Milsha12 Aug 15 2013, 01:38 PM

Turn signal lenses and buckets - one crack at top of driver side - $40 (set)

Lenses SOLD (Thanks David!)

Buckets still available - $15 ea. + shipping

Buckets SOLD - (Thanks Mark!)


Attached thumbnail(s)

Posted by: Milsha12 Aug 15 2013, 01:42 PM

- (4) Turn signal buckets (one with connector broken)
- (1) lens (stress cracks, but no large cracks)
- (2) seals (UPDATED was qty. 1, now 2)

$40 (all)

Each bucket - $15
Lens only - $15
lens and best bucket - $25


SOLD - Thanks, Mark!

Lens still available - (stress cracks, but no large cracks) - $10 + shipping


Attached thumbnail(s)

Posted by: Milsha12 Aug 15 2013, 01:44 PM

Fuel Tank fittings - $10 SOLD (Thanks Dan!)


Attached thumbnail(s)

Posted by: Milsha12 Aug 15 2013, 01:46 PM

Dash switches:

Headlight switch (working) - $25 SOLD (Thanks Brant!)
Fog light switch (need to test) - $25 SOLD (Thanks Erik!)
Hazard Switch (working) - $25
Cigarette Lighter - $20 SOLD (Thanks Ron!)


Defrost indicator - $20 SOLD (Thanks Dan!)


Attached thumbnail(s)

Posted by: Milsha12 Aug 15 2013, 02:36 PM

Fog lights - $30 (set) (price reduced)

no cracks in lenses but some black paint overspray
reflectors in good shape
housings have rust and will need work

SOLD (Thanks Erik!)


Attached thumbnail(s)

Posted by: Milsha12 Aug 15 2013, 02:41 PM

Gauge cluster - All worked when I ran the car last (a couple months ago), just needs a little cleaning - $150 (set)

I can provide more pictures if requested.

SOLD


Attached thumbnail(s)

Posted by: Milsha12 Aug 15 2013, 02:59 PM

Horns:
set of two pictured together - $20
single pictured - $10
set of two on car - $20


ALL SOLD - Thanks Tom and Dennis!


Attached thumbnail(s)

Posted by: Milsha12 Aug 15 2013, 03:02 PM

Set of door contact switches - may be sticky, not sure - $5 - SOLD
Set of door contact switches in car (1 pictured) - work well - $15 - SOLD

back pad light - not Hella, cracked, but works - $10 - SOLD (Thanks Dan!)


Attached thumbnail(s)


Attached image(s)

Posted by: t collins Aug 15 2013, 03:23 PM

Sending PM for both outside door handles and the pair of horns
Thanks, Tom

Posted by: Milsha12 Aug 15 2013, 11:28 PM

Trunk latch and lock with key (seal shown in picture is not included) - $25


Attached image(s)

Posted by: Milsha12 Aug 16 2013, 12:15 AM

Rear alignment shims plus miscellaneous parts and bolts - $30 shipped in US

Shims sold

Cover plates and remaining h/w - $15 shipped


Attached thumbnail(s)

Posted by: Milsha12 Aug 16 2013, 12:23 AM

Box of steering components - $40+Shipping


Attached thumbnail(s)

Posted by: Milsha12 Aug 16 2013, 12:28 AM

Nice Bilstein Jack - $20 + shipping - SOLD along with parking brake handle


Attached image(s)

Posted by: Milsha12 Aug 16 2013, 12:52 AM

Window mechanisms and guides - EVERYTHING PICTURED HERE for $30 + shipping


Attached thumbnail(s)

Posted by: Milsha12 Aug 16 2013, 01:13 AM

Carpet is in good shape - includes trunk carpet - needs a good cleaning - $70 + shipping - SOLD along with the center deposit (Thanks Ford!)


Attached thumbnail(s)

Posted by: Milsha12 Aug 16 2013, 01:17 AM

Back Pad truly is in excellent shape - you don't find them this good!

Vinyl is soft and board is still very solid, all screws are there. It hasn't been cleaned in a while and it still looks great!

$250 + shipping in the cont. US.

SOLD - Thanks Rob!


Attached thumbnail(s)

Posted by: Milsha12 Aug 16 2013, 01:26 AM

Rear / Tail lenses have some cracks - $70 for pair or $40 ea.

Lens and body $50 per side or $90 for the pair

(prices do not include shipping)

SOLD


Attached thumbnail(s)


Attached image(s)

Posted by: euro911 Aug 16 2013, 09:43 AM

Shipping a back pad - typically one disassembles it into 3 pieces, and it's still a big box. Hopefully you get a local buyer.

Posted by: Milsha12 Aug 16 2013, 03:30 PM

Sail Trim pictures from a PM request

Top and bottom side pieces SOLD (Thanks wolverine3000!)

Rear curved pieces and long top piece still available - SOLD!


Attached thumbnail(s)


Attached image(s)

Posted by: Milsha12 Aug 16 2013, 07:27 PM

Pictures of the front bumper pad that is still available - $75 + shipping (about $35)


Attached thumbnail(s)

Posted by: Milsha12 Aug 16 2013, 07:33 PM

Broken front bumperettes (nubs) (first two pictures) - $5 + shipping/handling

Rear bumper with one bumperette (needs some repair, overall not bad) (next 4 pictures) - $30 + shipping/handling

Front bumper (dented, rusted, still solid) (last five pictures) - $10 + shipping/handling

The bumpers are large and heavy, so I prefer pickup, but if you want them shipped, the shipping/handling charges are going to be significant. Let me know if you are interested and we can get an estimate the costs based on your zip code.




Attached thumbnail(s)


Attached image(s)

Posted by: Milsha12 Aug 16 2013, 11:53 PM

Side view mirror - $40 - SOLD (Thanks David!)


Attached thumbnail(s)

Posted by: mepstein Aug 17 2013, 05:03 AM

i'll buy for $40 + shipping. Let me know. thanks, mark

Posted by: Jeff Bowlsby Aug 17 2013, 11:04 PM

Are you sure this is a 1973 car? That rear bumper is a 1974 model. It is a 1974 model if the VIN starts with 474.

Will you carefully remove the chassis harness without cutting anything and sell it to me? Please contact me by email jabowlsby-at-gmail.com

Posted by: 914Sixer Aug 18 2013, 06:55 AM

I will take the trunk lock with key. Let me know how you want to get paid.

Posted by: Milsha12 Aug 18 2013, 02:11 PM

I've heard this before, but I think the bumper was replaced in a previous restoration. The vin on the windshiled is 4732905981. I haven't checked any other locations on the car to see if numbers match.


Attached image(s)

Posted by: Milsha12 Aug 18 2013, 02:50 PM

Inside / Interior door handles with linkage rod - two sets availabe, only one shown - $50 shipped per set (price updated)


Attached thumbnail(s)

Posted by: Milsha12 Aug 18 2013, 03:00 PM

Picture of armrest and tray - $40 (UPDATE) - SOLD - Thanks David!


Attached thumbnail(s)


Attached image(s)

Posted by: Milsha12 Aug 18 2013, 03:12 PM

Fog light grills, black paint overspray, one cracked, the other undamaged - pair $20+shipping

Vent boxes (pair) - operate well, but on one, the top of deflector falls in if pushed -pair $20+shipping

Headlight surrounds / bezels - black, pair, no cracks - $15+shipping

Black side view mirror, glass in good condition (no cracks) - $15+shipping


Attached thumbnail(s)


Attached image(s)

Posted by: barefoot Aug 18 2013, 07:47 PM

Posted by: Milsha12 Aug 18 2013, 08:49 PM

Here are some closer pictures...

UPDATE - SOLD


Attached thumbnail(s)

Posted by: hot_shoe914 Aug 19 2013, 06:10 AM

If the black side view mirroe is for the driver side and is not loose, I will take it. Shipping to 38117. Just let me know. Could really use this right away before RRC if possible. Mine won't stay in place above 60MPH.


Shoe

Posted by: brant Aug 19 2013, 10:06 AM

I need to buy a pair of screws to hold the mirror onto the door
they are a large phillips head with countersink shape

the exact same screws hold the striker plates into the door jambs.

any chance you would have a pair for sale that have clean faces and not slipped?

I also would be interested in a price for a headlight switch if you have it left still. Mine works but it jiggles in and out like the contact is getting loose internally.

thanks for your time
brant

Posted by: Milsha12 Aug 19 2013, 01:15 PM

PM Sent...Thanks, Brant

UPDATE: Found some extra striker plate screws in really good shape and threw them in with Brant's other purchase...

Posted by: Milsha12 Aug 19 2013, 01:39 PM

PM Sent. I believe this is a passenger side mirror.

Posted by: Milsha12 Aug 20 2013, 11:07 AM

Reduced price for brake cables to give a deal over the businesses. Should save you a few bucks if you need them and they are still new.

Parking brake / emergency brake / e-brake cables, mfg. by OEM Gemo, purchased new about 5 years ago, still in bags

$60 shipped in the US for the pair or $35 shipped in US for one



SOLD - Thanks Jim!

Posted by: euro911 Aug 20 2013, 01:09 PM

That's a good price for a set of new e-brake cables, guys

Posted by: Milsha12 Aug 22 2013, 01:38 AM

Many parts are still available that I haven't removed, so feel free to send me a PM and ask for parts even if you don't see them in my posts.

Price reduced on fog lights and pictures of them disassembled have been added: http://www.914world.com/bbs2/index.php?s=&showtopic=216859&view=findpost&p=1909723

More pictures of front bumper added based on a PM request: http://www.914world.com/bbs2/index.php?s=&showtopic=216859&view=findpost&p=1910488

Posted by: Milsha12 Aug 23 2013, 11:44 PM

Targa Roll Bar Pad -

One small crack and wear mark on passenger side.
One hole has some minor damange
Other than that, this part is in GREAT condition.
Comes with screws and 11 of the 12 plugs
Comes with metal latch plates (latches not included)

Price: $120 shipped anywhere in cont. US.

Add A-pillar and B-pillar veritical trim and front upper horizontal trim with outer seal (all in excellent condition) - $250 shipped

SOLD


Attached thumbnail(s)


Attached image(s)

Posted by: Milsha12 Aug 27 2013, 01:06 PM

Engine and trans are gone, seats are gone...

I just lowered the price on the roll bar pad to $120 shipped.SOLD

$800 $500 $300 buys you everything that is left, or all of these items are still available individually, so PM me if you are interested in anything:
- Excellent back pad ($250+S/H) SOLD
- (2) excellent knee pads ($100 ea.+S/H) one pending sale
- Roll bar pad, vertical trim in roll bar and by windshield, horizontal trim above windshield, visor mounting brackets & screws ($250 shipped for all) SOLD
- Speakers with grills SOLD
- Dash parts: Gauge cluster, Sapphire AM radio, seat belt light, hazard switch, 1 complete glove box w/ door, 1 extra glove box door
- Shifter knob, shifter
- Targa latches, trunk hinges, white targa clips from rear trunk
- Rear brake calipers ($100 + shipping)- Pending Sale
- Front brake calipers (need rebuild) and a set of "Cardone" remanufactured front calipers still in the boxes.SOLD
- 2 gas tanks
- 2 spare tires
- spare tire board
- fuel pump ($100+S/H)
- Relay board with cover ($50+S/H)SOLD
- headlight assemblies
- Trunk lock w/ latch and glove box lock with matching key
- Rims and tires - Two tires are 6 years old but used for under 5 miles and kept in the garage, the other two have good tread left but I don't know the age.
- tub
- doors
- both trunk lids plus an extra front
- engine lid and side grills
- all glass + extra glass
- window crank handles and mechanisms
- interior door handles and rods ($50 per set shipped) Pending Sale
- steering and suspension + extra steering components
- rear tail lights ($40 for all parts, see separate post: http://www.914world.com/bbs2/index.php?s=&showtopic=219971&view=findpost&p=1927575) - SOLD!
- lots of trim and seals
- 2 targa tops
- MORE

Posted by: Milsha12 Sep 19 2013, 02:22 PM

Price reduced for entire lot of what is left (not including anything sold or pending sale). You can look over the list in the last post, I've been keeping it pretty up-to-date.

$300 for EVERYTHING left! You just need to come and get it. About an hour north of Detroit, MI.

Posted by: shoguneagle Sep 20 2013, 12:55 AM

sent you an email regarding the roll bar rear chrome pieces (left & right curved and chrome across back). If you can sell them individually I will take them; if you have a buyer for the remainder including them, I will understand.

Steve