Printable Version of Topic
914World.com _ FS/WTB: 914 Parts _ OE 911 parts for proper 5 bolt conversion
Posted by: slcarr Aug 15 2013, 04:55 PM
I have complete pair of 108mm 911 drive flanges, the 108mm outer flanges and pair of 5 bolt outer hubs. $1,600 OBO. I also have used 108 CVs and axels, solid and vented rotors, solid or vented rear calipers. Many other 73 and earlier 911/912 and 914 parts.
Thanks, Steve. PS, could not get photo to go? Please email me at slcarr.steve@aol.com
Attached thumbnail(s)
Posted by: jimkelly Aug 15 2013, 06:17 PM
those 6 parts typically sell for about $300
how much for the 914 Stoddard catalogue??
jim
Posted by: slcarr Aug 15 2013, 06:25 PM
Hi Jim, maybe testing the market but I did do some research and talked to people supposedly in the know and that is what I came up with. The inner 901 flanges are the hard parts to find. The vintage now unavailable Stoddard catalog soon to be a collectable make me a offer. lol Thanks Steve
Posted by: chad newton Aug 16 2013, 05:56 PM
I will pay 250.00 shipped.
Posted by: slcarr Aug 16 2013, 06:02 PM
QUOTE(chad newton @ Aug 16 2013, 03:56 PM)
I will pay 250.00 shipped.
I guess you can stay behind the red curtain, hahaha
Posted by: 914Sixer Aug 16 2013, 08:29 PM
108 mm CV's have been NLA for a long time.
Posted by: slcarr Aug 16 2013, 09:08 PM
QUOTE(914Sixer @ Aug 16 2013, 06:29 PM)
108 mm CV's have been NLA for a long time.
I know, they are 110mm. I measured wrong.
Posted by: chad newton Aug 17 2013, 02:40 AM
QUOTE(slcarr @ Aug 16 2013, 05:02 PM)
QUOTE(chad newton @ Aug 16 2013, 03:56 PM)
I will pay 250.00 shipped.
I guess you can stay behind the red curtain, hahaha
Posted by: Mark Henry Aug 17 2013, 07:47 AM
Your price is whacked, I paid >$300 for mine.
Usually I wouldn't do this (as in never), but if you are going to put George (AA) prices to shame...then game on.
No such thing as a 110mm CV, it's either a 108mm or a 100mm.
I think they are 108's but they look different than mine, I don't have the divots inside the cup of the outer CV part.
If it's 100mm 6-bolt (75-85) they require mods and not worth as much. CV's are weak.
The correct 1974 to mid-year 1975, 108mm CV (4-bolt, 2 pin) is NLA as a single, you can buy whole axles (press CV's off and toss the 911 axle, $454. for two axles) or you can modify'86-89 108mm 6-bolt CV's ($300. for 4 kits).
911 axles are useless on a 914. Any way you go you have to buy new axles from swayaway ($320).
Also no bolts, washers, backing plates, gaskets.... that's an easy $100 if new.
As well as no CV boot flange which is NLA, not included in kits (but is included in full axles) and as rare as hens teeth....
Now anyone considering this knows the whole price, no surprises.
Posted by: Evil914 Aug 17 2013, 07:50 AM
QUOTE(Mark Henry @ Aug 17 2013, 06:47 AM)
Your price is whacked, I paid >$300 for mine.
Usually I wouldn't do this (as in never), but if you are going to put George (AA) prices to shame...then game on.
No such thing as a 110mm CV, it's either a 108mm or a 100mm.
I think they are 108's but they look different than mine, I don't have the divots inside the cup of the outer CV part.
If it's 100mm 6-bolt (75-85) they require mods and not worth as much. CV's are weak.
The 108mm CV (4-bolt, 2 pin) is NLA as a single, you can buy whole axles (press off and toss the axle, $454. for two axles) or you can modify'86-89 108mm 6-bolt CV's ($300. for 4 kits).
911 axles are useless on a 914. Any way you go you have to buy new axles from swayaway ($320).
Also no bolts, washers, backing plates.... that's an easy $100 if new.
As well as no CV boot flange which is NLA, not included in kits (but is included in full axles) and as rare as hens teeth....
Posted by: mepstein Aug 17 2013, 08:09 AM
QUOTE(slcarr @ Aug 15 2013, 08:25 PM)
Hi Jim, maybe testing the market but I did do some research and talked to people supposedly in the know and that is what I came up with. The inner 901 flanges are the hard parts to find. The vintage now unavailable Stoddard catalog soon to be a collectable make me a offer. lol Thanks Steve
The people supposedly in the know, don't. I bought my whole set up with boots and hardware (minus axles) for $300. Wasn't a deal, just normal price. The parts are very available.
Posted by: gcrotvik Aug 17 2013, 02:08 PM
Interested in the hubs only. PM sent.
Posted by: slcarr Aug 17 2013, 03:30 PM
QUOTE(mepstein @ Aug 17 2013, 06:09 AM)
QUOTE(slcarr @ Aug 15 2013, 08:25 PM)
Hi Jim, maybe testing the market but I did do some research and talked to people supposedly in the know and that is what I came up with. The inner 901 flanges are the hard parts to find. The vintage now unavailable Stoddard catalog soon to be a collectable make me a offer. lol Thanks Steve
The people supposedly in the know, don't. I bought my whole set up with boots and hardware (minus axles) for $300. Wasn't a deal, just normal price. The parts are very available.
No thanks
Posted by: Dave Davidson Aug 22 2013, 09:38 PM
Posted by: chad newton Aug 23 2013, 07:50 PM
I will do 300.00 shipped but that's the highest.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)