914World.com [Powered by Invision Power Board]

Posted by: bradtho Aug 24 2013, 11:42 PM

I got a set of T struts for a 5 lug conversion, but turned out the hubs were in pretty bad shape. So I'm looking for another set, this time with no flaking/electrolysis.

looking for the 3r model of hubs. these are 47mm deep for use w/ vented rotors, but use the "outie" style grease cap.

got some to sell? let me know.

Posted by: shuie Aug 25 2013, 08:36 AM

If you don't find one here try calling Jim @ EASY. http://www.easypor.com/ I was in the same boat recently and they really helped me out. The hub they sent me was priced fair and looked like NOS.

Posted by: bdstone914 Aug 25 2013, 10:19 PM

QUOTE(bradtho @ Aug 24 2013, 10:42 PM)

I got a set of T struts for a 5 lug conversion, but turned out the hubs were in pretty bad shape. So I'm looking for another set, this time with no flaking/electrolysis.

looking for the 3r model of hubs. these are 47mm deep for use w/ vented rotors, but use the "outie" style grease cap.

got some to sell? let me know.

I have one hub.

Posted by: bradtho Aug 26 2013, 12:45 AM

QUOTE(bdstone914 @ Aug 25 2013, 09:19 PM)

I have one hub.

thanks Bruce. I'll hit you up if I find another single.

Posted by: mskala Aug 26 2013, 06:19 AM

PM sent

Posted by: jhora Aug 26 2013, 08:38 AM

I have a set of 4R...will these work for you

Posted by: bradtho Aug 26 2013, 11:30 AM

thanks jhora. technically I think the 4r hubs would work fine, but I'm holding out for a set of 3r's.

Posted by: jaxdream Aug 28 2013, 11:05 AM

PM sent ...

Jack

Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB: pair of 911 front 3R hubs