Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ 911/01 Transmission

Posted by: proto31 Oct 1 2013, 09:39 PM

SOLD This transmission came from a 1971 911 with 20k documented miles. The transmission was opened up and inspected, everything was perfect, re-sealed with new seal kit. Perfect for a 3.0 conversion, you can bolt this straight up to a stock 3.0 without modification. The pull clutch is a big improvement over the standard 914 pulley clutch, same install just use the clutch cable from a 1975 911. A 914 tail cone was fitted along with a side shift consul. Include the clutch fork and a good used throughout bearing for the clutch. Gearing- O - GA - O - V - ZA. asking $1,400

Posted by: Blue6 Oct 3 2013, 08:49 PM

Im interested in your tranny. Can u give me a call or send a number to get in touch with u. Have some questions. Dave. (562) 244-9102. Thanx

QUOTE(proto31 @ Oct 1 2013, 08:39 PM)

This transmission came from a 1971 911 with 20k documented miles. The transmission was opened up and inspected, everything was perfect, re-sealed with new seal kit. Perfect for a 3.0 conversion, you can bolt this straight up to a stock 3.0 without modification. The pull clutch is a big improvement over the standard 914 pulley clutch, same install just use the clutch cable from a 1975 911. A 914 tail cone was fitted along with a side shift consul. Include the clutch fork and a good used throughout bearing for the clutch. Gearing- O - GA - O - V - ZA. asking $1,400

Posted by: proto31 Oct 3 2013, 09:05 PM

PM sent