Printable Version of Topic

Posted by: Tonyorlo Nov 2 2013, 12:17 PM

I bought this car for the engine , brakes, and the seats. I'm going to do the type 4 swap in my Ghia, so I will be able to sell some thing I won't need off of the engine. It has a side shift transmission. Both complete headlight assemblies are in the car, gas tank, wiper motor and arms, side and rear glass, and a lot of other parts. The body is completely shot, maybe some areas can be cut out for patch panels.

I do not plan to have the car for very long. I'm going to pull as much as I can off of it before I scrap it, but if you want something specific let me know so I can get it off of there before it goes. Pm me and I'll get back to you as quick as I can.

Posted by: tweet Nov 2 2013, 12:30 PM

pm sent

Posted by: Covvers Nov 2 2013, 03:35 PM

Hi,

I'm after roughly this section posted to Melbourne, Australia. I can see that it's dented, but that's ok, so long as it's not rusted it'll be in much better shape than mine. I've also sent you a PM.

Andrew

Posted by: toadman Nov 2 2013, 06:38 PM

Pending a few pictures and a price for the piece, I would like first dibs on the interior light in the center of the backpad. Thanks!

Posted by: colingreene Nov 2 2013, 08:11 PM

I need a stub axel

Posted by: mepstein Nov 2 2013, 08:40 PM

Give me a ring if you have an oem steering wheel. Thanks. Mark
Mark.Epstein@me.com

Posted by: Tonyorlo Nov 2 2013, 11:17 PM

I replied to all pm's, and sent some to people with questions.

I made a list of things I know the car has. I will test anything electrical before selling.



Firewall pad (behind seats) $15
Side engine grills $10 ea
Front trunk latch w/striker $15
Front hood springs w/ hinges and hardware $20 both
Gas tank $20
Wiper motor w/arms $40
Passenger side Air flap in cowl $10
Air filter box $15
Rear trailing arm w/strut $25 ea.

All prices without shipping

I'll cut off any sheet metal too. There's probably a lot more I'm forgetting.

Posted by: Tonyorlo Nov 3 2013, 07:17 AM

Posted by: Tonyorlo Nov 4 2013, 07:27 PM

Pic update

Top $40




Sound dampened behind seats $15

Blower in cowl, behind dash $20

Wiper assembly $40



Antenna motor, bad antenna $10


Gas pedal $10


Blower in engine compartment $15

Plastic trim for cowl(paint will be off before sold)$10


Air filter box w/ sensor $30

Passenger side a pillar trim $15




Washer fluid jug $10

Posted by: marcus p Nov 5 2013, 12:50 PM

QUOTE(Tonyorlo @ Nov 4 2013, 07:27 PM)

Pic update

Top $40




Sound dampened behind seats $15

Blower in cowl, behind dash $20

Wiper assembly $40



Antenna motor, bad antenna $10


Gas pedal $10


Blower in engine compartment $15

Plastic trim for cowl(paint will be off before sold)$10

Center console, in ok shape $15


Air filter box w/ sensor $30

Passenger side a pillar trim $15


Trim above windshield $15


Washer fluid jug $10

Posted by: Tonyorlo Nov 5 2013, 06:43 PM

I sent you a PM Marcus

Price list a few posts ago is updated.

Here is some other parts I pulled off the car today,

Light buckets, rubber seal in good shape on both of them $15 ea.

http://s59.photobucket.com/user/dhracer369/media/null_zps4ed27356.jpg.html

http://s59.photobucket.com/user/dhracer369/media/null_zps022ed69c.jpg.html

http://s59.photobucket.com/user/dhracer369/media/null_zps1d620302.jpg.html

http://s59.photobucket.com/user/dhracer369/media/null_zps327414de.jpg.html

Head light motors $10 ea.

http://s59.photobucket.com/user/dhracer369/media/null_zps9a78953f.jpg.html

Posted by: Tonyorlo Nov 6 2013, 06:07 PM

Passenger side air flap $10

Driver side defrost vent $15 (sorry for the bad pic)


Side shift trans shift rod cover at trans, in good shape no cracks $15

Posted by: KENNY Nov 6 2013, 06:45 PM

I will take drivers air flaps

Posted by: tweet Nov 6 2013, 06:48 PM

Hello Tony,
That;s the shift cover I was asking you about.

Posted by: Tonyorlo Nov 6 2013, 07:12 PM

QUOTE(tweet @ Nov 6 2013, 04:48 PM)

Posted by: carr914 Nov 6 2013, 07:12 PM

This Center Console is out of a 911/930 is worth way more than $15 - I don't need one (I have a couple) put it on Pelican for 4x your Price

Posted by: KENNY Nov 6 2013, 07:33 PM

QUOTE(Tonyorlo @ Nov 6 2013, 05:12 PM)

QUOTE(tweet @ Nov 6 2013, 04:48 PM)

Hello Tony,
That;s the shift cover I was asking you about.

Oh, sorry I miss understood. It's yours!

Kenny, I sent you an email with pics. Did you get it?

Posted by: Tonyorlo Nov 6 2013, 10:57 PM

QUOTE(carr914 @ Nov 6 2013, 05:12 PM)

This Center Console is out of a 911/930 is worth way more than $15 - I don't need one (I have a couple) put it on Pelican for 4x your Price

Posted by: arcadeforever Nov 7 2013, 10:12 AM

Do you have the ignition key and lock available?

Posted by: Tonyorlo Nov 7 2013, 11:21 AM

Yeah I do. Ill check to see if it actually works, I have 1 key. Any tips on getting it out?

Posted by: arcadeforever Nov 7 2013, 12:11 PM

here is the proceedure

http://www.pelicanparts.com/techarticles/914_ignition_switch/914_ignition_switch.htm

QUOTE(Tonyorlo @ Nov 7 2013, 12:21 PM)

Posted by: t collins Nov 7 2013, 02:34 PM

Is the fresh air control available?
Thanks, Tom

Posted by: rick 918-S Nov 7 2013, 03:33 PM

I want the trim above the windshield. The ones the visors attach to. PM sent

Posted by: Tonyorlo Nov 7 2013, 05:05 PM

Pms sent and replied to

Posted by: Tonyorlo Nov 8 2013, 03:04 PM

Picture update

Rear glass $20

Side covers $10 both


Passenger side marker plate $10

Lamp in rear trunk $10

Glove box door $15


Knee pad vents $10 ea.


Knee pad in good shapes few small cracks pictured $30

Posted by: Tonyorlo Nov 8 2013, 04:40 PM

Hvac controls $20

Posted by: worn Nov 8 2013, 06:52 PM

Thanks for super prompt response.

Posted by: Evil914 Nov 10 2013, 08:04 AM

QUOTE(carr914 @ Nov 6 2013, 05:12 PM)

This Center Console is out of a 911/930 is worth way more than $15 - I don't need one (I have a couple) put it on Pelican for 4x your Price

Posted by: KENNY Nov 10 2013, 08:07 AM

Do you have drivers side speaker cover

Posted by: eyesright Nov 10 2013, 09:04 AM

PM sent for steering cover.

Posted by: Tonyorlo Nov 10 2013, 07:23 PM

Kenny, Sorry but I dont have the speaker covers.

Pm replied eyesright

Im taking one for the team evil haha

Posted by: 1988Hawk Nov 11 2013, 04:58 PM

I will take the Heater Blower for $15.00.

How are the CV's?

Thanks,
Jim

Posted by: mhenderson57 Nov 12 2013, 08:08 AM

Do you have the cable that goes from the parking brake handle to where the cables split?

Posted by: Tonyorlo Nov 12 2013, 04:19 PM

No I'm sorry, it was rusted and pretty torn up.

Posted by: 914skraper Nov 12 2013, 05:31 PM

How about the trim piece from the inside top of the targa bar? to 80129

Posted by: Tonyorlo Nov 12 2013, 06:35 PM

I'm sorry it's sold. I'm slacking on my list. I will update it now.

Posted by: 914runnow Nov 13 2013, 10:16 AM

Hi there..still wondering on the main harness??
they can be 'cut out' too..it is about 1/2 hour job
with the body stripped...and still be intacted..
unless you meant the harness is 'hacked up'.....
thanx Rx

Posted by: Tonyorlo Nov 13 2013, 11:24 AM

QUOTE(914runnow @ Nov 13 2013, 08:16 AM)

Posted by: 914runnow Nov 13 2013, 12:30 PM

QUOTE(Tonyorlo @ Nov 13 2013, 10:24 AM)

QUOTE(914runnow @ Nov 13 2013, 08:16 AM)

Hi there..still wondering on the main harness??
they can be 'cut out' too..it is about 1/2 hour job
with the body stripped...and still be intacted..
unless you meant the harness is 'hacked up'.....
thanx Rx

Hey, sorry I didn't get back to you. I was looking at it and it's not in terrible shape. I think a few things have been cut off here and there. I won't be able to check it out until Saturday. I will pm you with some pictures and info on it. I don't mind cutting it out

Posted by: Tonyorlo Nov 13 2013, 12:44 PM

QUOTE(914runnow @ Nov 13 2013, 10:30 AM)

QUOTE(Tonyorlo @ Nov 13 2013, 10:24 AM)

QUOTE(914runnow @ Nov 13 2013, 08:16 AM)

Hi there..still wondering on the main harness??
they can be 'cut out' too..it is about 1/2 hour job
with the body stripped...and still be intacted..
unless you meant the harness is 'hacked up'.....
thanx Rx

Hey, sorry I didn't get back to you. I was looking at it and it's not in terrible shape. I think a few things have been cut off here and there. I won't be able to check it out until Saturday. I will pm you with some pictures and info on it. I don't mind cutting it out

awesome and thanx for the quick reply...
and just to make sure..the car is a 1.8??
Rx

Posted by: rmdinmd Nov 17 2013, 08:07 PM

I am interested in the seat sliders on the drivers side.

Posted by: Tonyorlo Nov 17 2013, 09:14 PM

I'm keeping those because I'm swapping the seats into my karmann ghia, sorry.

Posted by: luka Nov 21 2013, 09:23 PM

Hi. Is the quarter left hand side door glass (ie, the small trianglar quarter glass and rubber on forward section of door) in good condition ie.without scratchs.
would you sent to australia Melbourne.
email address; domenicluka@hotmail.com
Thanks
Domenic Luka

Posted by: Tonyorlo Nov 22 2013, 04:00 PM

Luka, Sorry but it had a chipped corner so I didnt pull it.

Posted by: luka Nov 22 2013, 06:47 PM

Thanks for replying. Hope your sale goes well.
Luka

Posted by: hotlanta914 Dec 12 2013, 07:40 PM

I am interested in the passenger side trailing arm - please let me know if it is still available - thank you,

Brian

Posted by: poorsche914 Dec 13 2013, 08:49 AM

Interested in the targa bar trim - the piece that goes across the top forward section that the top latches come thru. How much and what condition?

thanks,
steve

Posted by: Tonyorlo Dec 13 2013, 02:57 PM

Brian, I still have the trailing arm. Ill shoot you a PM later today with more info on it.

Steve, sorry but that pad was cracked pretty bad.

Posted by: 73cool Dec 13 2013, 05:40 PM

Do you still have the washer fluid bottle?

Posted by: Tonyorlo Dec 13 2013, 07:27 PM

Yeah I still have it. Shipping will be $16 flat rate, shoot me a PM if you want it.

Posted by: 914_teener Dec 13 2013, 08:21 PM

I'd like that interior light on the backpad if it isn't cracked.

PM me with details when you get a chance.

Rob

Posted by: Tonyorlo Dec 13 2013, 10:00 PM

Rob, sorry but it was cracked. Your probably the 20th person to ask about it. I'm assuming it's a common peice to break?

Posted by: rhodyguy Dec 14 2013, 08:04 AM

correct interior lights that are unbroken are one of the hardest items to source.

Posted by: Tonyorlo Dec 14 2013, 07:43 PM

I was looking into making molds for tail lights, making new/custom ones for my ghia. It's really not that hard to make a lens. If I were to make them, they would sell?