Printable Version of Topic

Posted by: Mblizzard Mar 5 2014, 08:43 PM

As I was in the process of inventorying my parts to start my road back to FI I noted that I seem to be missing the mounting parts to hold the breather box on to the intake tubes.

Anyone got an extra?

Posted by: bdstone914 Mar 5 2014, 09:13 PM

You mean these tubes ?

If so Pelican has them new for about $4.

http://www.pelicanparts.com/cgi-bin/ksearch/PEL_search.cgi?command=show_part_page&please_wait=N&make=POR&model=9144&section=FULint&page=2&bookmark=5&part_number=039-133-241-M21


Attached thumbnail(s)

Posted by: Mblizzard Mar 5 2014, 09:34 PM

I will have to get out the PET and get the part number but I remember a bracket that the latches on the bottom of the breather box clipped on to.

Posted by: bdstone914 Mar 5 2014, 09:51 PM

By breather box do you mean the air cleaner or the intake plenum ?


edit, I think I know what you mean. It is a bracket that attaches to the intake runners and the air cleaner sits on top of it. It is about three parts. I might have one that is not cracked. I do have a NOS clamp that goes under the intake runner.
Like this ?

Bruce


Attached thumbnail(s)

Posted by: Mblizzard Mar 6 2014, 06:47 AM

That is it! Not sure that I need NOS. Used would be fine.