Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: Foam Tape for Dash Face Install
Posted by: dgale914 Mar 11 2014, 04:13 AM
One of the last things to do in the interior of my 2.2L 'S' powered car......
Looking for a source for the thin foam tape used to affix the basket weave covered metal dash face to the dash. Needs to be very thin for obvious reasons.
Where can I purchase similar foam tape?
Thanks!
Doug
Posted by: saigon71 Mar 11 2014, 05:45 AM
Doug:
I just installed a new radio with a backing plate and was looking for a similar product.
While not exactly foam, I found some 3M double sided industrial strength tape at Lowes that matched the thickness perfectly.
Bob
Posted by: dgale914 Mar 11 2014, 06:10 AM
Doug:
I just installed a new radio with a backing plate and was looking for a similar product.
While not exactly foam, I found some 3M double sided industrial strength tape at Lowes that matched the thickness perfectly.
Bob
Looks like McMaster Carr also has some various thickness tapes....
http://www.mcmaster.com/#fastening-tape-with-adhesive-on-both-sides/=r1o8wr
Posted by: bulitt Mar 11 2014, 06:34 AM
Saw some in H.Depot yesterday. Paint/glue section.
Posted by: Larmo63 Mar 11 2014, 04:10 PM
I used clear (very thin) velcro so they can come off if necessary.
It works great and firm.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)