Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB Bursch exhaust for 71 1.7L as well as a set of Webers

Posted by: WestTX914 May 1 2014, 12:52 PM

As the title says I'm looking for aset of carbs and a Bursch Exhaust for my 71. Thanks Mike

Posted by: yeahmag May 1 2014, 02:57 PM

I have a complete 2L setup including a Bursch I may sell in the near future if you are interested...

Posted by: WestTX914 May 1 2014, 05:34 PM

my motor actually has less than 5000miles on it but I appreciate the offer

Posted by: mepstein May 1 2014, 05:36 PM

are you looking for driver quality or new?

Posted by: yeahmag May 1 2014, 05:38 PM

Sorry, that wasn't clear. I have a complete 2L exhaust set up - not motor.

QUOTE(WestTX914 @ May 1 2014, 04:34 PM)

my motor actually has less than 5000miles on it but I appreciate the offer

Posted by: Redhorseracing May 1 2014, 09:02 PM

I have a set of Weber 40 IDF Carbs if your interested. I can send some pics if you like!
Thanks,
Blake

Posted by: WestTX914 May 1 2014, 10:36 PM

[Correct me if I'm wrong the 2.0 setup won't fit on the 1.7l?

Posted by: WestTX914 May 5 2014, 04:19 PM

I got a set of Carbs still looking for the Exhaust. Thanks Mike

Posted by: stugray May 5 2014, 07:42 PM

I have what I believe to be a "bursch":

IPB Image

That appears to be intact (no rust-through) and could use a good coating or paint.
Sorry if I misidentified it.

And I have some SS HEs if you poke around the same area of those photobucket pics.

Posted by: stugray May 5 2014, 09:16 PM

Did you need heat exchangers with that?

I have two different kinds (not sure which is which):

IPB Image

The second set is SS and are in great shape.
I dont know which one is correct for your car to fit the bursch.
I also have different kinds of hangers.

Posted by: WestTX914 May 5 2014, 09:26 PM

I'll check mine tomorrow but I think I'm good. I'll check in the AM thanks Mike

Posted by: bdstone914 May 5 2014, 09:46 PM

The SS are 2.0 and the steel ones are 1.7 or 1.8.
Match the flange hole pattern of the heat exchanger to the muffler. The hole pattern is different between the two types.
Either can be put on a 1.7 if the correct muffler bracket is used.