Disassembled some 911 axles to rebuild for my car.
One of the CV boot flanges is a cobbled up piece (doesn't match the others). I know these are NLA, but wondered if anyone has one here I can buy from them.
This is for a 108mm CV (not 100mm 914 CV) 4-bolt flange (not 6)
I also need 2 "moon" washers for the 108mm flanges.
I just need the flange to be straight and not banged up. I will strip and have replated).
PM me if you have a spare flange and/or moon washer and what you want $$ including S/H to Orlando, FL (zip = 32832)
Note: This moon washer is different than the 914 moon washers.
Thanks!
Q
You might have better luck over on the 911 Pelican board.
I though I had two of the style half moon clips you wanted but only found one of that type and tow of the type pictured.
I am thinking if a "prototype" 911 has an asking price of 21M these must be worth $100,000. Or best offer for getting my hands dirty.
Bruce
Attached thumbnail(s)
This request is complete.
Thanks!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)