Printable Version of Topic

Posted by: 914forme May 11 2014, 04:29 PM

I need a set of 914-4 front A-arms, these need to be -4 so the splines are correct for my 21mm torsion bars. Straight good condition, I will also need the rear T-bar caps.

I have a set of 911s that have ~19mm torsion bars if you would want to trade up.

Posted by: bdstone914 May 11 2014, 06:01 PM

QUOTE(914forme @ May 11 2014, 03:29 PM)

Posted by: bdstone914 May 11 2014, 06:29 PM

QUOTE(bdstone914 @ May 11 2014, 05:01 PM)

QUOTE(914forme @ May 11 2014, 03:29 PM)

I need a set of 914-4 front A-arms, these need to be -4 so the splines are correct for my 21mm torsion bars. Straight good condition, I will also need the rear T-bar caps.

I have a set of 911s that have ~19mm torsion bars if you would want to trade up.

I have a pair of -4 A arms I will trade for 911 A arms.

Do you have the torsion bar caps for them ?

Do you need the sway bar tabs on them ?

Do the 911 A have the U tab for the through body sway bar or the loop bracket for the under body sway bar ?

Bruce

Posted by: danimal16 May 12 2014, 10:26 AM

You have a PM.

V/R Dan B