Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS- 914-4 -4- tipped exhaust muffler

Posted by: ETMracing May 14 2014, 08:37 AM

Unsure of this brand muffler, pipes are closer to middle than the Ansa 2.0 I have. Pretty sure this is a 1.7l muffler. Its a bit rusty but the only hole I see is a 3mm hole on the can. Maybe someone could use this. Havent cleaned it yet and when I was moving it around i could here some rust flakes inside can from sitting for many years.
length of muffler = 37.5"
tip end to tip end = 17.5"
tips = 2"
I.D tips = 1.85"
flange ends to flange ends = 30.25"
ID of flange pipes are 1.45"

Willing to ship this heavy item for $30.00 in the 48US

Muffler is $100

http://smg.photobucket.com/user/etmracing/media/20140514_095139_zps11b375e2.jpg.html

http://smg.photobucket.com/user/etmracing/media/20140514_095157_zpsaa7cc7b3.jpg.html

http://smg.photobucket.com/user/etmracing/media/20140514_095220_zpse15b656e.jpg.html

Posted by: bdstone914 May 15 2014, 07:50 AM

Actually it looks more like a 2.0 from the position of the flanges that would tuck the muffler under the rear panel. Measure the distance between the flanges the determine which type it is.

https://bowlsby.net/914/Classic/zTN_Exh_MufflerID.jpg