Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS: FAT 2.6 Ltr Twin Plug w/ 2 stage dry sump Sold!
Posted by: sixforme May 20 2014, 05:40 PM
2.6 Liter disassembled, unsplit case, freshly remachined twin plug heads, new exhaust valves, guides and seats, J&E pistons, Autocraft 2 stage dry sump.
These are $15,000 + engines from FAT and RAT. Rabys SS 2270 engine, quoted on his website, is $15,250 + a $1500 core, is $16,750!
This is a much larger, twin plug, and dry sumped 2.6. !!!
I am asking $3,500 IN "as is" condition. I have over $1,000 invested in work and new parts.
If desired, FAT will recondition, dyno and certify this engine for approx $2,000.00, I am 325 miles from there and can deliver the engine in a matter of 4.5 hrs driving time.
And because I am moving the car south from Seattle I can (possibly) deliver the engine for free on the west coast. :-)
FAT degreed crank pulley
Autocraft 2 stage dry sump oil pump
Six high pressure hoses for pump and sump
Unknown manufacturer mini oil screen/sump
Canton CM 6 inch canister anodized fuel filter with bracket
Sachs PP and disc, both new
JE 103 mm w/230 forge mark. Lands cleaned, and reliefs cc'd to 2cc's, pin bores honed.
Cyl's deglazed, have slightest ring ridge, hardly felt by touch.
Modified Nissan 720 dual plug distibutor
Finned cast aluminum valve covers
All engine tin (highly modified to suit the Porsche shroud)
SEV Marchal alternator p/n 712 330 02 / 70 amp 14v
11 blade 911 Porsche fan and 901 106 101 5r housing
Late 2.0 heads (casting 039.101.371.A) oversize valves
48mm intakes swirled, 38mm sodium filled exhaust, 59 cc chambers
2 exhaust manifolds unknown manufacture or brand
there is no serial number on the case see first picture in front of oil breather tower
must be replacement case, smooth not ground off.....
standard parts with engine
starter
single mount oil filter
standard type 4 oil cooler
Bore is 103mm Stroke is 78mm = 2599 cc = 2.6 liter
the engine has been balanced as evidence of lightening is apparent on the rods
and rod bolts.
I believe the ports have been matched on the intakes. (in seattle)
Not shown but available (in seperate storage unit in seattle in car)
Weber 45 carbs manifolds and linkage
twin bosch coils on bracket
possible new rocker arm feet (Porsche 911)
Notice
The oil system is no longer avail as a package with this engine, they were not
built together, the oil system was built for a six that was also in the car. The oil system is listed in another ad.
Attached thumbnail(s)
Attached image(s)
Posted by: carr914 May 20 2014, 06:39 PM
Not that I'm interested, but for $5k you need to give a lot more info including Receipts.
Personally I look at any disassembled Engine as a core & would pay accordingly no matter who might have done the work
Posted by: bdstone914 May 20 2014, 07:23 PM
What was the reason that required the engine to be disassembled?
Posted by: sixforme May 20 2014, 08:42 PM
What was the reason that required the engine to be disassembled?
lost some compression one cyl , 2 bad ex valve seats hence the total rebuild on heads, 4 new intake valves also cc"d the heads again. $500 + valves have that receipt from 1999 done by Dan Halls in Portland still in plastic, still in box.
Posted by: race914 May 24 2014, 01:29 AM
What is the bore/stroke? Induction setup? Crank Fire? FAT 911 Type Shroud? Type of Headers?
Posted by: sixforme Jul 3 2014, 08:03 PM
Fat Performance engine w/ Dry sump oil cooling sys.
2.6 Ltr disassembled, re-machined heads, new valves, guides and seats, JE pistons ,Autocraft dry sump system, with aeroquip lines to the front mounted MoCal oil cooler w/ dual oil filter. I may still have the custom aluminum oil tank.
Looking for any interested buyers, if found, will go to my storage unit to drag it all out to the house for the first time in 10 years, and will photo and describe in detail if a reasonably interested party is found, thanks, These are approx $15,000 engines these days from FAT and Jake Raby ( UPDATE: just checked Rabys 2270 engine, Quoted on his website, $15,000+ $1200 core) , I will ask around $5,000 based on research and available records and dismantled condition. Its possible FAT has more documented info still based on serial number. Engine is in NW Arizona (Kingman) 90 mi south of Vegas
Bump for update
Posted by: Krieger Jul 3 2014, 08:23 PM
Cool Greg. I was hoping you'd see this.
Posted by: sixforme Jul 6 2014, 05:04 PM
bump
Posted by: sixforme Jul 10 2014, 04:44 PM
bump
Posted by: pneuhyde Jul 11 2014, 11:09 PM
What was the mileage on the engine when disassembled and are the carbs and exhaust included?
Posted by: sixforme Jul 12 2014, 03:07 PM
What was the mileage on the engine when disassembled and are the carbs and exhaust included?
The piston skirts show little to no wear, while the condition of the the heads is of course newly rebuilt as shown, since the prior owner is deceased over ten years ago
trying to tell the mileage is impossible, my interpretation of the situation is that he installed this engine and shortlly there after overheated it and cracked the exhaust seats in two cylinders, but rather than fix the motor, he pulled it and installed a six in the car shortly thereafter he fell ill and died , someone got the six out of the car and bought it from his widow or it was possibly being built or rebuilt by a shop?, when i arrived the Fat motor was in the back of the garage, the six was gone and I was offered what was left.... I never found all the exhaust for the fat motor. and I never got some of the six parts , I got a mixed bag of two different engine installations and a rusty car and a burnt valve Fat motor.
Posted by: sixforme Jul 15 2014, 07:15 PM
bump
Posted by: race914 Jul 17 2014, 06:09 PM
For everything you've listed located in AZ, and everything you've listed in storage near Seattle, I'd be a buyer at $2000
Posted by: koozy Jul 17 2014, 06:52 PM
How much for the carbs, intakes and linkage?
Posted by: sixforme Jul 17 2014, 07:00 PM
How much for the carbs, intakes and linkage?
If I part out the engine I will let you have first crack at them...
Posted by: koozy Jul 17 2014, 07:06 PM
thanks
Posted by: sixforme Jul 20 2014, 12:04 PM
bump
Posted by: sixforme Jul 23 2014, 02:30 PM
Price reduction, now $3800
Posted by: rhodyguy Jul 24 2014, 03:53 PM
seattle proper or near by? glwys.
Posted by: sixforme Jul 24 2014, 04:10 PM
seattle proper or near by? glwys.
The engine is here in Arizona, the car full of parts is in Belfair
Posted by: sixforme Jul 26 2014, 10:36 AM
bump for price reduction....
Posted by: sixforme Jul 28 2014, 12:43 PM
Bump for new price $3500 or make an offer
Posted by: sixforme Jul 30 2014, 10:44 PM
New price $3250 OBO , also need the 6 conversion cooling system gone!
Posted by: sixforme Aug 1 2014, 11:19 AM
Sold..... to Vinniedatorch
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)