Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS: 1911 engine
Posted by: ablesnead Jun 9 2014, 03:01 PM
I have a 1911 engine ...approximately 2000 miles...setup for carbs with Engle cam..starts right up and doesnt smoke ....I think valves are noisey...750.00 plus shipping from Florida...will deliver up to 400 miles
Posted by: ChrisG914 Jun 9 2014, 03:52 PM
What is a 1911 motor? If you mean 911 I will take it. PM day ails please.
Posted by: Black22 Jun 9 2014, 04:04 PM
1911cc motor = 66mm crank (1.7-1.8L engine) with 96mm pistons and cylinders (upgrade used on the 2.0L engines to make a 2056cc motor)
Posted by: ChrisG914 Jun 9 2014, 04:14 PM
Ah. Only had 2.0l 4 and sixes in my 914 to dates so my lack of knowledge shined. Thanks for filling me in. I have no need for a type 4 and will pass on this.
-Chris
Posted by: bdstone914 Jun 9 2014, 06:56 PM
More details like the carbs used and pictures will help sell it. The price is pretty good for a running engine.
Posted by: ablesnead Jun 9 2014, 07:03 PM
no photos at present ....has complete tin ..everything but carbs ..has manifolds for dell 40's....no exhaust
Posted by: ablesnead Jun 15 2014, 07:10 PM
bump
Posted by: ablesnead Jun 19 2014, 06:34 PM
bumpity bump
Posted by: euro911 Jun 21 2014, 12:19 AM
Because prospective buyers may need to calculate shipping charges, maybe you can be a little more specific as to your location?
GLWS
Posted by: ablesnead Jun 30 2014, 09:38 PM
bump
Posted by: sean_v8_914 Jul 1 2014, 01:01 PM
where is this gem located? CA, AK, VT?
Posted by: euro911 Jul 1 2014, 01:15 PM
Looks like he updated the first post. FL
Posted by: ablesnead Jul 1 2014, 04:47 PM
never updated...said Florida from the get go...must be hard to read as written..note taken
Posted by: euro911 Jul 2 2014, 03:48 AM
It's no secret that my eyes are starting to go ... along with everything else 
1911s are pretty peppy with the short stroke crank. This is a good deal for someone needing a low-mileage running motor.
Post some pix if you can
Posted by: sean_v8_914 Jul 2 2014, 11:14 AM
ive been hit in the head too many times
Posted by: sean_v8_914 Jul 2 2014, 11:15 AM
never head butt a planet
Posted by: SLITS Jul 2 2014, 11:30 AM
never head butt a planet
Ur-anus?
Posted by: ablesnead Jul 6 2014, 11:06 AM
bump
Posted by: ablesnead Jul 6 2014, 11:06 AM
will consider any offer
Posted by: ablesnead Jul 8 2014, 03:48 PM
bump
Posted by: ablesnead Jul 11 2014, 06:53 PM
bump
Posted by: ablesnead Jul 16 2014, 06:52 PM
bump
Posted by: Old Yella Jul 16 2014, 10:08 PM
Post some pics and I bet you will get a buyer.
Posted by: ablesnead Jul 23 2014, 03:14 PM
bump
Posted by: emmanueldelvalle Jul 23 2014, 03:33 PM
bump
Posted by: ablesnead Jul 28 2014, 08:41 PM
bump
Posted by: ablesnead Aug 2 2014, 07:29 PM
bump
Posted by: Larmo63 Aug 2 2014, 09:09 PM
I'm beginning to think there is no motor here for sale....
Posted by: ablesnead Aug 2 2014, 09:26 PM
You must have missed the "don't comment on ads rule " probably because it didn't have a picture .
Posted by: stevegm Aug 10 2014, 09:34 AM
Here are photos of the engine.
Attached image(s)
Posted by: stevegm Aug 10 2014, 09:38 AM
For some reason it posted these photos upside down. When I open the files on my computer they are the right way, but, not here. Sorry. I hope these photos help. Engine looks like it is a good deal.
Posted by: Gint Aug 11 2014, 06:23 PM
My first 914 had a 1911 (1.8 w 96mm PC) with carbs. It was a decent motor. Pulled well even at altitude. 
Posted by: ablesnead Aug 13 2014, 09:01 PM
bump
Posted by: ablesnead Aug 24 2014, 08:57 PM
bump
Posted by: Jetsetsurfshop Aug 26 2014, 05:57 PM
Could be a nice back-up engine for Chump car.
Just saying....
Posted by: ablesnead Aug 26 2014, 07:30 PM
TRade it for a ride..Sebring chump....save your expensive motor !
Posted by: ablesnead Aug 29 2014, 09:00 PM
bump
Posted by: 914nola Aug 31 2014, 07:43 AM
Do you have cards for it?
Posted by: Jetsetsurfshop Aug 31 2014, 06:58 PM
TRade it for a ride..Sebring chump....save your expensive motor !
I'd probably do it if it was my car. Don't tell George (thepaintedman), he'll kick me off the team for a good back-up motor.
Posted by: ablesnead Aug 31 2014, 07:21 PM
George would never do that...maybe he will bite for the next race......
Posted by: ablesnead Sep 5 2014, 02:43 PM
bump
Posted by: ablesnead Sep 12 2014, 05:49 PM
bump
Posted by: ablesnead Sep 22 2014, 06:04 PM
bump
Posted by: runfaster Sep 22 2014, 10:34 PM
I will take it if you can tell me how much shipping would be to 97304. I think it would be really expensive. Let me know. Maybe we can work something out...
Posted by: ablesnead Oct 5 2014, 06:02 PM
I have a 1911 engine ...approximately 2000 miles...setup for carbs with Engle cam..starts right up and doesnt smoke ....I think valves are noisey...250.00 plus shipping from Florida...will deliver up to 400 miles
Posted by: mr2by4 Oct 5 2014, 07:30 PM
Is it on a pallet and ready to ship? Unless you want to deliver it to Texas...
Posted by: ablesnead Oct 7 2014, 05:41 PM
on a pallet ready to go
Posted by: mr2by4 Oct 16 2014, 10:24 AM
Paypal sent!
Posted by: mr2by4 Oct 27 2014, 05:56 AM
Paypal sent!
waiting on shipping confirmation.
paid Oct 16.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)