Note: This ad is being posted for another member here, Ablesnead. I'll do my best to answer any questions that you might have though.
For sale is a set of Dellorto DRLA 40 carburetors in very good condition. Lorin sent me these carbs for me to inspect and clean up but has since decided to go another direction and has asked me to help sell them for him.
From what I know these were installed on a 1911 and ran well. They throttles operate smoothly and I see no evidence of the dreaded "Dellorto drip". The fuel bowls were very clean and it is obvious that these carbs have not sat out in the rain or been mistreated. I have not rebuilt them as they appear to have been serviced fairly recently. All seals and gaskets are in good shape.
Here are the jetting specs:
Chokes (main venturis): 34 mm
Mains: 150
Idles: 55
Pump jets: 35
Also included is a set of CB Performance linkage and air cleaners. These carbs will be available on 914World for 2 weeks before going to Ebay.
Attached thumbnail(s)
Two more pics. Others available upon request.
Attached thumbnail(s)
Scared me...for a minute I thought you were selling mine!
Does the FS stamped in them mean they'll always be For Sale ?
Hi,
What kind of intake manifold would one use with these carbs?
Thanks,
Bill.
You know me better than that Bill H.
To the other Bill, something like these will work well with a street-driven car. http://www.cbperformance.com/ProductDetails.asp?ProductCode=3156
There are also shorter intakes that will work, but typically those will net a little less torque in sacrifice for perhaps a couple more hp. There are several different designs out there, from various manufacturers. CB Performance is probably the most popular.
Bdstone914 and a few others here have a lot of used dual carb intake manifolds for sale, probably much cheaper than buying new from CB. You'd just need to place a WTB. I unfortunately don't have any left after I did my last batch of carb rebuilds/sale.
Bumpity bump
Bump for new price. The carbs are easily worth 500 in the shape they're in, combined with the velocity stacks. The linkage retails for over 100 as well. So next stop will be Ebay. Thanks for looking.
These carbs are at an excellent price. I had George do two sets for me and he knows his stuff. There's a guy on Ebay that specializes in carburetors and he sells just one Dellorto bare bones without the velocity stacks at $500 or more. That' s just for ONE.
bump
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)