Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB early glove box

Posted by: porbmw Jul 29 2014, 08:53 AM

Need to recover from a stall on this project, have discovered it is now about 8 years since car came apart.

So need to locate a very clean, early glove box (from the early cars, which came without dash vents....box is wider than later version)

Thanks

Paul

Posted by: Phoenix-MN Jul 29 2014, 09:46 AM

QUOTE(porbmw @ Jul 29 2014, 06:53 AM) *

Need to recover from a stall on this project, have discovered it is now about 8 years since car came apart.

So need to locate a very clean, early glove box (from the early cars, which came without dash vents....box is wider than later version)

Thanks

Paul


I should have one from a '71. I'll check tonight when I get home

Paul

Posted by: porbmw Jul 29 2014, 10:39 AM

QUOTE(Phoenix-MN @ Jul 29 2014, 08:46 AM) *

QUOTE(porbmw @ Jul 29 2014, 06:53 AM) *

Need to recover from a stall on this project, have discovered it is now about 8 years since car came apart.

So need to locate a very clean, early glove box (from the early cars, which came without dash vents....box is wider than later version)

Thanks

Paul


I should have one from a '71. I'll check tonight when I get home

Paul



From Paul to Paul

Thanks.


Posted by: Phoenix-MN Jul 31 2014, 05:07 PM

Sorry, it took me a while to find it. It is an early one but has a nasty hole in the side (all the pieces are there) it could be repaired smash.gif Pay for shipping and you can have it.

Paul

Posted by: porbmw Aug 1 2014, 02:05 PM

QUOTE(Phoenix-MN @ Jul 31 2014, 04:07 PM) *

Sorry, it took me a while to find it. It is an early one but has a nasty hole in the side (all the pieces are there) it could be repaired smash.gif Pay for shipping and you can have it.

Paul



Thanks for checking,Paul.
I think I have it's sister glove box...mine too has a hole...I'm guessing the previous owner put a hole in the bottom to run some wires into the box.
I very much appreciate the offer. I know it's a hassle to ship stuff. If you don't mind, let me fish around theworld for one that doesn't need repair....failing which, I will practise my repair skills on my semi destroyed box....and if it looks like I'm getting the hang of doing a decent repair, will shoot you an email if you still have the box hanging about.

Thanks again

Paul

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)