FS: rubber windshield seal from 914 rubber, new in the bag. just like this:
http://shop.914rubber.com/914-Windshield-chrome-replacement-rubber-914WSR.htm?categoryId=-1
on their store for $26 + shipping, I'll do for $25 with shipping
I went with the chrome trim instead so no longer need this
thanks
pm sent
Obviously you didn't install it, but curious how difficult is it to replace the OEM with one of these?
Anybody? Bueller?
I would like to know also please
Sold
For those that asked on difficulty to install, it has a butyl bead on the inside track that touches the glass to help hold in place. You will not require the 19 outer clips or the setting blocks. Some like to paint a frit around the outside 1/2" as the urethane bead can be seen. The better solution is to make a nice bead and install it straight in. The frit (in my opinion draws more attention to the fact it's not an OEM install) is not required, and if you don't it looks like the stock , but black and without clips.
Who makes the stock rubber gasket for the windshield for those of us who want the trim?
I stock the on the site.
How does that work? I thought the OEM seal was a glue compound?
There's a rubber seal that we can still use the brightwork trim with? Do you also sell the mounting clips, Mark? Never mind - found them
...
how about for the rear window? a rubber seal?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)