Printable Version of Topic

Posted by: Eric_Shea Aug 15 2014, 08:45 AM

So... In the land if Excel spreadsheets, embedded links can copy into the wrong format (or so I'm told). The result may be 12 center tunnel lines that were never really ordered!!

Working on a restoration? Here's the perfect piece to complete the center tunnel. These are prebent off original templates. 3D scanned and CNC bent for a perfect fit

Regular price is $48.95

Inventory clearance sale is $16.95 plus shipping (roughly $7.00 to the East Coast).

I have 12 3 of these available

Posted by: Eric_Shea Aug 15 2014, 09:46 AM

It happened with the right front lines as well. PN 914-355-618-00

Retail $21.95
Inventory reduction $7.95 plus shipping (roughly $7.00 to the East Coast. Combined Shipping for both lines is the same.)

I have 14 5 of these available.


Attached thumbnail(s)

Posted by: 02loftsmoor Aug 15 2014, 10:17 AM

Are these problem-atic??? the heLL hole is my only problem area.. Texas car.

Posted by: Eric_Shea Aug 15 2014, 01:41 PM

If they rust, they can spin the line itself when removing the adjacent soft line or adapter fittings (center tunnel line) from their 10x1 ends.

If the line starts to spin before the end, that's my que to get a new hard line.

Maybe not so problematic in Texas but, in other areas, yes.

Posted by: Tom_T Aug 15 2014, 02:10 PM

sent you a PM.

Posted by: Eric_Shea Aug 15 2014, 02:46 PM

Tom, invoice sent. Thanks!

Posted by: 9146BRUCE Aug 15 2014, 03:01 PM

Hi Eric
I will take one of each shipped to 91325.Lem me know final cost.
Thanks Bruce

Posted by: rmdinmd Aug 15 2014, 03:03 PM

pm sent

Posted by: tweet Aug 15 2014, 03:11 PM

Hi Eric,
One of each for me.
-Dan

Posted by: euro911 Aug 15 2014, 04:04 PM

I mistook them for fuel lines

What was I thinking (don't answer that)


I'd be happy to purchase enough lines to compete one (1) vehicle, please

I'll need to order the other (non-on sale) lines from the site?

Posted by: JStroud Aug 15 2014, 04:05 PM

Hey Eric, I'll take two of each, you can send a PayPal invoice to jsconstruction@live.com
And I'll probably pay it.

Thanks,
Jeff

Posted by: Eric_Shea Aug 16 2014, 04:04 PM

All paid orders shipped.

Posted by: Harpo Aug 17 2014, 05:43 AM

One of each please

Thanks

David

Posted by: Gint Aug 17 2014, 07:23 AM

Eric, Are these suitable for all models? If so, I'll take one of each. And can you hook me up on the other three corners as well?

Posted by: Eric_Shea Aug 17 2014, 12:20 PM

Hey Mike, center tunnel and front lines (with the exception of the front caliper hard lines) are all the same.

Rear engine compartment lines changed in mid-late 74 with the relocation and slight redesign of the pressure regulator valve.

On the way... David, got you as well.

Thanks guys.

Posted by: 914four Aug 17 2014, 12:29 PM

This is a good time for me to replace my lines. I would like to order the center tunnel line as well as the front lines if they are available.

Kelvin

Posted by: 914four Aug 17 2014, 12:29 PM

Sorry, double post. Not sure how that happens.

Posted by: porbmw Aug 17 2014, 04:32 PM

Hi Eric

Can you put together a set for a 6....?

I think you have my credit card info....it renewed early this year...if not, would you please email me.

And thanks

Paul

Posted by: draganc Aug 18 2014, 10:46 AM

Eric, I'll take one of each please. PM the total cost, shipped to 08540, and I'll paypal the funds.

Thanks, Dragan

Posted by: tweet Aug 18 2014, 11:01 AM

paypal sent

Posted by: Kansas 914 Aug 18 2014, 12:38 PM

PM sent for a set of each - thanks!

Posted by: Eric_Shea Sep 8 2014, 12:32 PM

I think we have about 3 of these sets left.

Posted by: Tom_T Sep 8 2014, 01:01 PM

I ran out of time to post/PM that I got my shipment okay before I left Eric, then forgot again while on the road 8/22-9/6.

Thanx Eric!

Posted by: Garold Shaffer Sep 8 2014, 01:17 PM

I will take a set if you still have them.

Posted by: draganc Sep 8 2014, 05:59 PM

Got my set last week, looking good. Thanks!

Posted by: edrotol Sep 8 2014, 06:34 PM

QUOTE(Eric_Shea @ Aug 15 2014, 07:45 AM)

So... In the land if Excel spreadsheets, embedded links can copy into the wrong format (or so I'm told). The result may be 12 center tunnel lines that were never really ordered!!

Working on a restoration? Here's the perfect piece to complete the center tunnel. These are prebent off original templates. 3D scanned and CNC bent for a perfect fit

Regular price is $48.95

Inventory clearance sale is $16.95 plus shipping (roughly $7.00 to the East Coast).

I have 12 3 of these available

Posted by: Jett Sep 8 2014, 07:57 PM

Anymore available, if so I'll take one. Please ZpM

Cheers

QUOTE(Eric_Shea @ Aug 15 2014, 07:45 AM)

So... In the land if Excel spreadsheets, embedded links can copy into the wrong format (or so I'm told). The result may be 12 center tunnel lines that were never really ordered!!

Working on a restoration? Here's the perfect piece to complete the center tunnel. These are prebent off original templates. 3D scanned and CNC bent for a perfect fit

Regular price is $48.95

Inventory clearance sale is $16.95 plus shipping (roughly $7.00 to the East Coast).

I have 12 3 of these available

Posted by: davep Sep 9 2014, 04:53 AM

914.355.613.00
914-355-618-00

two of each please, and I'll contact you about a few more items for an order.
Dave

Posted by: Chris H. Sep 10 2014, 07:58 PM

Not sure if you have any left but let me know. I'll take one of each if so, or let me know what you have left. I really need the front right (PN 914-355-618-00) more than the tunnel but all mine are original so it's probably time to do them all.