Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Plating service - sharing costs

Posted by: bdstone914 Aug 25 2014, 11:28 AM

I need to get some parts plated in silver ( clear ) zinc. I only have a set of alloy lug bolts and a canister strap. Anyone have some parts they need plated and willing to share costs?

Parts that were originally silver were door striker plates, the latches that are inside the door and attach to the striker plate, charcoal canister straps, hold down plates for headlight pivots, fuel injection rails and injector hold down brackets, front turn signal U brackets.

Any of the steel parts can be plated. Zinc parts can not be plated. Parts must be paint and rust free.

The minimum plating charge is $50 and I have two 50 mile round trips to drop off and pick up the parts. It I could get a couple of people to join in at $25 each it could work out.

You can call me at 951 536 seven four seven eight to discuss.
Bruce

Posted by: euro911 Aug 25 2014, 04:53 PM

I do, Bruce. Problem is, it'd take me a month to gather up all the stuff

Posted by: 914Sixer Aug 25 2014, 05:25 PM

Bruce, I have some ready right now. 210-262-4226