Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS: USA rear lens, new hood crest, gauge back, mag lug bolts

Posted by: Chris Pincetich Sep 23 2014, 07:56 PM

Help me clean out the attic beerchug.gif

USA drivers side tail light, one broken stud. $20
Some "spider web" on the red part. I used this for 5+ years, with the post glued, and it came apart when I swapped 'em. Glue it again, and good to go!

Instrument gauge back plate w surface rust. $5

New Porsche hood crest, new seal, new speed nuts. part # 993-559-211-00. $60

Box of 12 mag seat lug nuts + 4 w McGuard wheel lock pattern. $5
The mag seat is flat seat. I can measure it exact if needed. beerchug.gif

These would ship from the San Francisco Bay Area, CA to you.
Paypal is cool with me. beerchug.gif

Attached ImageAttached ImageAttached Image[attachmentid=468
098]Attached ImageAttached Image



Attached image(s)
Attached Image

Posted by: euro911 Sep 24 2014, 01:42 AM

Hey Chris, I'm interested in the lug bolt set. PM me with payment details

Can you let me know the outer diameter of the 'flats' too ?

Thanks

Posted by: bdstone914 Sep 24 2014, 06:21 AM

QUOTE(euro911 @ Sep 24 2014, 12:42 AM) *

Hey Chris, I'm interested in the lug bolt set. PM me with payment details

Can you let me know the outer diameter of the 'flats' too ?

Thanks


Hi Mark,

I have some of those type lug bolts too if you want to round out a set of 16 without using the locking ones. I see two head styles in his stash.
Bruce

Posted by: Chris Pincetich Sep 29 2014, 04:27 PM

icon_bump.gif
Had some "tire kickers" but nobody has sealed the deal.
All parts still available beerchug.gif

Posted by: Chris Pincetich Oct 3 2014, 01:22 PM

icon_bump.gif

Posted by: Evil914 Oct 18 2014, 08:24 PM

I'll take the lug bolts if you still have them,pm me your paypal info.please.Carl

Posted by: X911IC Oct 18 2014, 09:12 PM

Chris, will take hood crest. Will send PM, Thanks Neil

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)