We have been parting this '73 914 out. We are ready to go ahead and cut the body up for parts. I will say $30 - $400 as far as price, depending on the specific piece needed. See photos below (please excuse all the dirt). Can cut any piece out that you need, including fenders, quarters, chassis pieces, interior, trunk, etc. Also have - Front trunk, Rear trunk, Engine lid, Targa top
PM me with your email address if interested.
FRONT CROSS PANEL - SOLD
LEFT REAR QUARTER - SOLD IN PARTS. STILL HAVE THE SECTION ABOVE THE WHEEL, AND THE SAIL PANEL.
UPDATE:
I'd like to get rid of this car. It is taking up garage space. Tell me what you need, and make me an offer.
WHAT I STILL HAVE:
Rear Panel - $40
Windshield posts and top - $40, but, shipping will be brutal
Entire right side - tell me what you need
Both Doors - PM me for pictures
Front Hood - PM me for pictures
Rear trunk - PM me for pictures
Engine Lid - PM me for pictures
Suspension - I have it all. PM with what you need.
Steering - I have it all. PM me with what you need.
Thanks,
Steve
Attached image(s)
Is that a LE front valance? How much if? What condition? Pm me on the info
Thanks,
Finn
Look at you first picture of the drivers rear quarterpanel.I need the top rear corner of it. about a 10x10 inch piece of the drivers rear quarter. what would that cost??
What condition is the rear bumper top?
How much?
Steph
How about both or one engine lid hinge mounts?
Hate to ask the question, but was paint code L80E?
Hi,
I'm looking to get hold of the section of the rear body panel driver's side. Between arch and door jamb beneath the sail panel (but not including sail panel).
I tried to link a pic of where I mean but Photobucket is down right now…will try posting a pic as soon as it's back up.
Can you post to the UK?
Thx a lot, Ollie.
…this bit.
http://s1235.photobucket.com/user/914Silverfox/media/2deecc39-b079-4cbf-9aba-c4dd6cd55d57_zpsf151656f.jpg.html
Cheers.
What shape are the "chrome" sail panel trim pieces? If in good shape how much?
If you need any body parts let me know. I will be continuing to cut this car up over the next few days.
Maybe interested in front hood and rear decklid depending on condition, price and location.
stevegm,
I am interested in the floor section of the front trunk, please quote me a price if possible thank you,
PM sent.
Vysoc
We will be cutting up the rest of this car this weekend. PM me if you need any parts.
Bump for update.
Do you still have this section? How much with shipping to 33621?
what shape is the front nose in? possibly I need the front and along the side of the front trunk...
yep, that is what I was talking about...no problem, going to get mine pulled...
Bump. Still cutting her up. Need anything?
Last call. Anybody need any sheet metal or chassis parts?
Is that passenger exterior door handle any good?
Looking for rear panel from light to light and down to the seam sealer on the inside bottom edges in the trunk.
See outlined on my car below...
Let me know if you can cut this and how much you'll need.
B.Marks
Cincinnati, OH 45249
any of the front trunk reinforcing available? Looking for the right side between the nose and the wheel well....also the top that the plywood floor rests on...thanks,herb
looking for #10 and #26..right hand side...
Hi. Do you have the steering pan? In good shape though. Got one but it's rusty. Thanks.
Steve, is this car gone?
Steve - looking for front trunk floor to fix an a/c car. My son can pick up if you have it. Thanks, mark
Attached thumbnail(s)
I'd like the door posts. With a little bit of fender skin left on.
I could use the left and right cowl corners where my hood hinges bent/ripped mine.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)