Printable Version of Topic

Posted by: flat6parts Oct 23 2014, 04:15 PM

914-6 914/6 Factory Rear Valance
Ready for primer and paint
Factory Part Number: 91450360710

$500, with our 25% off sale, grab this rare valance for $375 plus tax and shipping!

Paypal or credit card through our webstore. Last day of parts sale 10-31-14.

http://www.carrerapartsonline.com/store/p195/914-6_914%2F6_Factory_Rear_Valance_%28C6%232932%29.html








Kent

Email: Carreraparts@gmail.com
Store: www.carrerapartsonline.com
Service: www.Carrera6.net
(626)-429-2371

Posted by: django Oct 24 2014, 07:40 AM

I will take it, pm sent.

Posted by: gcrotvik Oct 24 2014, 08:35 AM

Be careful. This seller has had a questionable past.

Posted by: bdstone914 Oct 24 2014, 09:57 AM

Does that exhaust hoke look oversize?

Posted by: Mike Fitton Oct 24 2014, 03:26 PM

This is not a 914-6 rear valance it is an early 914-4 rear valance port hole is in the wrong position, see real 914-6 valance below:

Posted by: funk Oct 24 2014, 03:44 PM

these are new prices some of them at least!! this guy is not only a questionable past but price gouger from hell!! just an opinion!!

Posted by: 396 Oct 24 2014, 09:29 PM

The seller is only asking a reasonable price for this so called-6 valence. If you can find NEW ones at that price, I will take a dozen. ...but in reality you can't. So back to basic marketing one of one. If you still think it's too much, you have better start playing with Match Box toys. Playing with rare Porsche parts is not easy....it all depends on how deep your pocket is.

Posted by: mepstein Oct 24 2014, 10:03 PM

That's what I thought but wasn't 100% sure.

Of course honesty isn't high on the list for sebrig66, Carrara parts, flat6parts, whatever his name is this week.

Posted by: rick 918-S Oct 25 2014, 07:36 AM

I watched that auction and didn't notice the hole location was off. mrbmw2002 sold that one advertised as a factory 6 part for $ 410.00

Posted by: porbmw Oct 25 2014, 09:36 AM

I have one...don't need another'
But emailed this ebay vendor, asked him about the placement of the hole, let him know that I was concerned that it appeared very much to be from a non 6....
He never responded, let the auction run...someone got ripped.
I am SO not impressed with the vendor....and he sells a bunch of teener parts.

BTW
The price offered on this thread is dirt cheap.
If I felt like hoarding, I would buy this in a minute.
There are uber difficult to find.

Posted by: gcrotvik Oct 25 2014, 11:26 AM

The question was not really about price but rather, would you ever received it once you paid for it.

Posted by: flat6parts Oct 27 2014, 11:58 AM

This item had been SOLD
Thanks

Posted by: rgalla9146 Oct 28 2014, 06:28 AM

I don't know much about the seller but I'll take that part right now.
Even 4 cyl. port hole valences are hard to find.
The part is for a 6.