I need both left & right Exhaust headers for a 1976 2.0 car.
Engine #GC004694
Part 1a on the parts diagram
Thanks[/URL][/img]
I have a pair that look just like that that came off a '74 bus. If you can confirm that they are the same, I'm happy to help out.
I also have a full 1.7/1.8 early style exhaust with a new, never mounted Bursch if you want to convert. The tube diameter is slightly smaller than the early 2.0, but will certainly be an improvement over the late system.
Send me a PM, and I can send some pics.
I think the bus engines have a different shape exhaust port.
I have a pair of the 914 exhausts. They do not have the outer sheet metal shields.
Cheap but will have to check shipping to Sweden.
Bruce, he just needs the headers.
If Bruce can't fix you up, I have some.
The 74 bus didn't use the same exhaust setup. It had large heater boxes. '75-'77 or maybe '78 should work. The ports changed in '79, or maybe '78.
The Cap'n
I also have a set that have been blasted and painted with hi-heat paint
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)