Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB: Oil Baffle with Heat Shields

Posted by: Sfreeman615 Nov 7 2014, 11:42 AM

I need to buy an oil baffle with the heat shields ASAP, very hard to source! I have a 1.7l case. I believe any year fits. See the pic below:

Posted by: Brian_Boss Nov 7 2014, 11:55 AM

I have one. How about actual shipping plus $10 for lunch money

Posted by: Sfreeman615 Nov 7 2014, 12:15 PM

QUOTE(Brian_Boss @ Nov 7 2014, 11:55 AM)

I have one. How about actual shipping plus $10 for lunch money

Done deal!! Pm me your paypal address or however you want me to pay !! Thanks brother, you are a life saver!!!

Posted by: Brian_Boss Nov 7 2014, 01:17 PM

OK, I jumped the gun. He needs both the pickup tube and the baffle/windage tray (as pictured - duh). I only have the windage tray.

Posted by: Cap'n Krusty Nov 7 2014, 01:55 PM

If you have a 1.7 case, it would be good to check the case and be sure it's one that has provisions for mounting the windage tray. Many early cases lack the channel for the seals.

The Cap'n

Posted by: pilothyer Nov 7 2014, 02:56 PM

QUOTE(Cap'n Krusty @ Nov 7 2014, 01:55 PM)

If you have a 1.7 case, it would be good to check the case and be sure it's one that has provisions for mounting the windage tray. Many early cases lack the channel for the seals.

The Cap'n

, and of course who wouldn't

Your early 1.7 case needs to be at least engine# W0 074 387...from this case on will have the required shelf for the baffle plate to rest in..........also be sure to use the seals on the baffle plate or you will have a rattle you don't want in there.