Printable Version of Topic

Posted by: rdauenhauer Nov 22 2014, 11:42 AM

Yes crazy as it sounds Im after a set of the tubes that screw into the late 75-76 heads that mate to the air injection "spider " pipe....

Prefer trade

Posted by: bdstone914 Nov 22 2014, 12:28 PM

I think I can dig up a set for you. Got any of the large hose clamps for the air tubes in the front?

Edit:
Got this set. Drilled out the carbon as they were plugged solid and cleaned the threads.
Will these work for you ?



Attached thumbnail(s)

Posted by: PCA7GGR Nov 22 2014, 01:02 PM

I've got these and could use restorable early fog lights and engine lid grills:

Posted by: rdauenhauer Nov 23 2014, 02:31 PM

Bruce Done!
PM sent.

Posted by: McMark Nov 23 2014, 06:36 PM

Rich, need any other smog parts? I think I have a few that would look great in your garage.

Posted by: rdauenhauer Nov 24 2014, 08:57 AM

Ok I'll bite. Yes, do you have the check valve at the top of the Spider pipe that's not cemented closed by carbon or rusted to Sh*t ?

Posted by: Bleyseng Nov 24 2014, 09:39 AM

Rich, I'll look at the one I have too.

Posted by: rdauenhauer Nov 24 2014, 09:46 AM

Geoff you still need to swing back by & collect those bumpers.

Posted by: stugray Nov 24 2014, 02:46 PM

I have a complete smog system with the typical broken rubber part of the pulley.

Posted by: Bleyseng Nov 24 2014, 04:59 PM

[quote name='rdauenhauer' date='Nov 24 2014, 07:46 AM' post='2114191']
Geoff you still need to swing back by & collect those bumpers.
[/quoteyep, gotta make some time so maybe tomorrow afternoon

Posted by: 914werke Jan 22 2022, 07:59 PM

Thread resurrection ~
Again looking for some Air injection tubes.

Posted by: 914Sixer Jan 23 2022, 07:31 AM

Here are some NOS but the price is STUPID.


Attached thumbnail(s)

Posted by: KevinW Jan 23 2022, 09:15 AM

I have 3 with caps.
Kevin


Attached thumbnail(s)

Posted by: bdstone914 Jan 23 2022, 06:38 PM

@http://www.914world.com/bbs2/index.php?showuser=453

I have four of them with the big end brazed shut. Free if you want them.

Posted by: 914werke Jan 24 2022, 01:24 PM

Saw that, had a chuckle.
@http://www.914world.com/bbs2/index.php?showuser=18761 Thanks Kevin Ill let you know.
@http://www.914world.com/bbs2/index.php?showuser=1319 Thx bruce... maybe if the threads are clear I could drill out the brazing do you have a pic?

Posted by: 914werke Jan 24 2022, 01:24 PM

Posted by: bdstone914 Jan 25 2022, 06:54 PM

@http://www.914world.com/bbs2/index.php?showuser=453
One has some brazing on the top threads but can probably be repaired
with a thread file.


Attached thumbnail(s)

Posted by: Jett Jan 26 2022, 12:17 PM

Rich, I found three that you can have… someone welded in the internal but can easily be drilled out.

I can drop them off on the weekend… so you need one more

Posted by: sportlicherFahrer Feb 4 2022, 10:12 AM

Pretty sure I have a set with caps rolling around in my tool cart. How soon do you want them, Rich?