Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: Carb Cam & Lifters
Posted by: VWTortuga336 Nov 29 2014, 02:52 PM
I'm looking to buy a cam that is compatible with dual carbs. A matching set of lifters would be nice as well.
Posted by: stugray Nov 30 2014, 03:44 PM
I have a used Raby cam with matching lifters never ran.
The lift was too high for my build (>.55), so for a street car, the cam would need to be reground.
But LN eng or webcam could regrind it for you.
If you went through LN, they might just swap it out for a fee or have it reground to one of the other type-IV store (Raby) profiles.
I'll have to see what it is worth.
Posted by: RobW Nov 30 2014, 04:53 PM
I have a brand new Webcam 73 and matching lifters NIB. Was going to carbs with a 2056 and changed my mind to stay with FI. Cam is already attached to good gear drive.
Posted by: VWTortuga336 Nov 30 2014, 05:23 PM
I have a brand new Webcam 73 and matching lifters NIB. Was going to carbs with a 2056 and changed my mind to stay with FI. Cam is already attached to good gear drive.
How much are you asking for everything?
Posted by: RobW Nov 30 2014, 05:37 PM
I have a brand new Webcam 73 and matching lifters NIB. Was going to carbs with a 2056 and changed my mind to stay with FI. Cam is already attached to good gear drive.
How much are you asking for everything?
I misspoke. The 73 Cam is a FI replacement. I have an 86 cam NIB which is for carbs.
The gear looks new and is mounted which saves you as well.
I'll PM you with a price if you are still interested. Thx
Posted by: VWTortuga336 Nov 30 2014, 06:16 PM
I have a brand new Webcam 73 and matching lifters NIB. Was going to carbs with a 2056 and changed my mind to stay with FI. Cam is already attached to good gear drive.
How much are you asking for everything?
I misspoke. The 73 Cam is a FI replacement. I have an 86 cam NIB which is for carbs.
The gear looks new and is mounted which saves you as well.
I'll PM you with a price if you are still interested. Thx
PM sent
Posted by: RobW Nov 30 2014, 06:30 PM
Deleted
Posted by: RobW Nov 30 2014, 06:31 PM
Deleted
Posted by: VWTortuga336 Dec 2 2014, 01:37 PM
Still in the market
Posted by: Mark Henry Dec 3 2014, 10:13 AM
Unless you can find new with matching lifters, like RobW has, I wouldn't even mess with this. Totally false economy if you have a used cam go flat in you new engine. There has been a huge percentage of cams go flat in the last 10+ years.
Also not matching the cam to your driving needs, just because you saved a couple of bucks, is just plain dumb.
Buy a new one with matching lifters.
Posted by: VWTortuga336 Dec 3 2014, 10:48 AM
Unless you can find new with matching lifters, like RobW has, I wouldn't even mess with this. Totally false economy if you have a used cam go flat in you new engine. There has been a huge percentage of cams go flat in the last 10+ years.
Also not matching the cam to your driving needs, just because you saved a couple of bucks, is just plain dumb.
Buy a new one with matching lifters.
Thanks for your input, that's exactly what I'm looking for
Posted by: VWTortuga336 Dec 5 2014, 08:41 AM
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)