Very large stash of Porsche 914 parts, some extremely rare (a few select 911 parts too)
See the entire inventory (images and prices) here (cut and paste to your browser):
http://s32.photobucket.com/user/david16481960/library/#/user/david16481960/library/?sort=3&page=1&_suid=140597006175803401894749848999
Located in Charles Town, WV (eastern panhandle) 25442
Don’t reply to this posting or PM me as this is for a friend of mine. I rarely use 914World anymore.
Contact Greg at
greg_cobb@comcast.net
914 Calipers=$75 a pair
911 Calipers=$125 pair
Accusump=$200
Front turn lens (euro?)= $40 pair
Axles/CV’s/Stubs=$125 each
Interior back panel (with light) =$100
Battery tray (new) =$40
Bilstien yellow=$125 pair
Front hoods=$175 each
Porsche 914 Bra=$75
New (German) rotors front and rear=$50 each
Cam=$50
A-Arms w/cross member=$200
A-Arms=$85 Each
CV’s=$45 each
Dash cover=$75
Engine lid w/rain tray=$125
Deep sumps=$50 each
Ignition rotor (new) =$30
Fog relay=$20
Square relay=$10
Ignition condensers=$18 each
Two GA 2.0 block w/cranks=$750 each
Various fan shrouds=$40 each
Fiberglass GT style fender flares=$150 a pair
Fuel pump=$50
GC 2.0 bare block (repairable crank journal damage, new studs) =$100
Headlight motors=$50 each
Rare headlight washer motor=$75
Heat exchangers (lightly used) =$200 set
Type IV heads=$200 set
Four 2.0 jugs=$125 full set
Koni yellow or koni red=$125 a set
License plate/trunk light=$30
Oil cooler=$35
Oil cooler with breather tank=$75
Rain tray=$50
Rear lenses=$75 each
Finned alum cylinder covers=$75 pair
Seat mounts=$35 each
Two solex carbs w/intakes=$500
Speaker cover=$75
Outer rocker (steel) =$125
Steering rack w/tie rods=$350
Transmission side shift console cover=$40
CV boots (new) =$5 each
Steering boots (new) =$15 each
Transmission linkage firewall boots (new) = $20 each
OEM air filters (new) = $12 each
OEM German oil filter=$15
Black powder coated engine tins=$400 set
Trailing arms (with shafts) =$100 each
Transmission cores=$300 each
Tall intakes=$150
Approximately 11k in parts.
Parts sold individually or the entire horde could be had for bids over 8k
I will take the rear Koni's with adjustment knob
Interested in the Heat Exchangers, What Engine size are they for? more pics?
Bump to refresh. Please keep in mind DO NOT CONTACT POSTER.
Contact the person indicated in the original post. I've posted this on his behalf and will not respond to ANY inqueries or posts.
D
he responded and ..what happened to the one Koni rear shock.???
Sigh.
Before you hit reply or send a PM, please READ THE ORIGINAL POST CAREFULLY.
You can do this, I know you can....
Many of you have emailed the contact person Greg C in WV and found out that he was recently out of country.
I heard from Greg today and he's back for a few weeks and ready to ship out a buncha parts to everyone who has made inquiries. He also wanted me to express his gratitude for ya'lls patience.
Please remember to contact him directly at:
greg_cobb@comcast.net
and not the poster of this thread (a friend who is only facilitating Greg's liquidation of 914 parts).
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)