Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB: Pedal Board Securing Hardware - RESOLVED!

Posted by: GregAmy Dec 23 2014, 09:41 AM

RESOLVED! Got the parts I need.

WTB the washers, spacers, and machine screws to hold the pedal board to the floor, both sides. I have the board itself but it was not installed in the car so all the securing hardware is AWOL...

I have an extra (warped) pedal board with the stops if anyone needs that.

GA

Posted by: MJHanna Dec 23 2014, 10:10 AM

Rennline sells it $6.95 in stainless with nut and washer.
http://www.rennline.com/Rennline-Stainless-steel-floor-board-hold-down-bracket-Porsche/productinfo/F40/

Posted by: bdstone914 Dec 23 2014, 10:28 AM

QUOTE(MJHanna @ Dec 23 2014, 10:10 AM)

Rennline sells it $6.95 in stainless with nut and washer.
http://www.rennline.com/Rennline-Stainless-steel-floor-board-hold-down-bracket-Porsche/productinfo/F40/

I question if that really fits a 914. The dished cutout looks larger and the 911 mount at the bottom. The 914 uses a Allen head bolt not a nut. It is only one of the pieces. The other is a dished washer. I can probably round up a set.
Bruce

Posted by: GregAmy Dec 23 2014, 11:35 AM

Thanks for the link above!

QUOTE(bdstone914 @ Dec 23 2014, 11:28 AM)

I can probably round up a set.

Stock stuff is fine. Send me a PM or email? 06457, grega at pobox dot com.

GA