Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Long list of parts for sale new ones added daily

Posted by: 70-914nut Dec 28 2014, 11:41 AM

Expansion tank 20.00+shipping
Gas tank overflow and cap 40.00 + shipping
Engine mounts? 10.00+ shipping
Tire hold down and wing bolt 15.00 shipping
Front drain plug set 20.00+ shipping
Windshield wash res. 50.00 plus shipping
Headlight motors 40.00+ shipping
Engine lid release cable 26.00 shipped

Climate control assy 20.00 plus shipping
Headlight motor covers 10.00 each plus shipping

Relay 5.00 plus shipping
Front axle nut covers 5.00 each plus shipping
Bosch alternator don't know if it works best offer
Old jack I cleaned up that was in my parts bin make offer
Lots of other stuff available just ask

Here is a pic of the jack Attached Image[attachmentid=481106][attachmentid=481322][attachmentid=481
323] [attachmentid=481323][attachmentid=493734]

Posted by: mepstein Dec 28 2014, 12:04 PM

I would like the left and right speaker grills if they are in very good condition. No cracks, chips or broken pieces.

Posted by: PCA7GGR Dec 28 2014, 12:57 PM

PM sent on jack - thanks

Posted by: Ansbacher Dec 28 2014, 01:08 PM

I'll take the Tire Hold Down and Wing Nut - PM Sent.

Posted by: 70-914nut Dec 28 2014, 01:18 PM

Wing nut and hold down are sold I will delete

Posted by: 70-914nut Dec 28 2014, 01:24 PM

Mark grills are not perfect but very nice driver ones.[attachmentid=481097] [attachmentid=481098]

Posted by: mepstein Dec 28 2014, 02:31 PM

QUOTE(70-914nut @ Dec 28 2014, 02:24 PM) *

Mark grills are not perfect but very nice driver ones.

I'm going to pass. I already have a couple sets of driver quality.

Posted by: BeatNavy Dec 28 2014, 03:02 PM

I'm interested in the heater blower. Do you know if it's working (well) and can you send a picture?

Thanks.

Posted by: FourteenFour Dec 28 2014, 05:24 PM

I'll sent a PM regarding the jack.

Posted by: BeatNavy Dec 28 2014, 06:02 PM

Ok, I'll take the heater blower. I'll send a PM.

Posted by: charlesmac Dec 28 2014, 09:51 PM

Have you got a fog light lens? Just need one

Posted by: 70-914nut Dec 29 2014, 03:56 PM

QUOTE(charlesmac @ Dec 28 2014, 07:51 PM) *

Have you got a fog light lens? Just need one

I do have one lens somewhere but not sure what year it is for

Posted by: barefoot Dec 29 2014, 07:05 PM

Got any of these captive nuts ? trapped on underside of dash to hold knee pad

Attached Image

Posted by: 70-914nut Dec 30 2014, 06:50 AM

I'll check today after work

Posted by: forrestkhaag Dec 30 2014, 09:39 AM

I would like the gas tank overflow ring and cap / please call for payment via paypal, cash or other / also the shift linkage boot if the firewall boot / please advise if available / how about 75.00 for both bundles?

thanks

949 422-3384
Forrest

Posted by: 70-914nut Dec 30 2014, 12:01 PM

QUOTE(forrestkhaag @ Dec 30 2014, 07:39 AM) *

I would like the gas tank overflow ring and cap / please call for payment via paypal, cash or other / also the shift linkage boot if the firewall boot / please advise if available / how about 75.00 for both bundles?

thanks

949 422-3384
Forrest

Sent a text to the number if it's not a cell just give me a buzz at that number

Posted by: pilothyer Dec 30 2014, 04:06 PM

Hey Dude....I am interested in the Engine mounts? 10.00+ shipping, could you add a pic just to be sure of what they are? Jerry

Posted by: 70-914nut Dec 30 2014, 06:31 PM

Attached Imagewhats up Jerry!

Posted by: 70-914nut Jan 1 2015, 10:48 AM

Parts added daily

Posted by: 70-914nut Jan 2 2015, 07:55 PM

More picsAttached Image Attached ImageAttached Image

Posted by: 70-914nut Jan 5 2015, 04:45 PM

That's a windshield washer switch make an offer

Posted by: 70-914nut Jan 5 2015, 04:48 PM

[attachmentid=482087] [attachmentid=482088]

Posted by: barefoot Jan 7 2015, 03:08 PM

do you have the 2 round grills that go in the door frame to exit vent air ?

Posted by: 70-914nut Jan 7 2015, 03:48 PM

Like this?Attached Image

Posted by: barefoot Jan 7 2015, 08:02 PM

QUOTE(70-914nut @ Jan 7 2015, 04:48 PM) *

Like this?Attached Image

No, these go under the dash, I'm after round ones about 2" diameter located in the door jam openings to let air vent out.

Posted by: pilothyer Jan 7 2015, 11:56 PM

QUOTE(70-914nut @ Jan 5 2015, 04:48 PM) *

[attachmentid=482087]


Barry I would like these.....Jerry

Posted by: Mikey914 Jan 8 2015, 12:03 AM

Strut bumpers - I'll take em.
Just let me know how to pay.

Posted by: pilothyer Jan 8 2015, 12:41 AM

QUOTE(Mikey914 @ Jan 8 2015, 12:03 AM) *

Strut bumpers - I'll take em.
Just let me know how to pay.


Mark.........I beat you by 7 minutes..........Jerry biggrin.gif

Posted by: 70-914nut Jan 8 2015, 04:42 PM

Ok I think I have everyone taken care of sorry for replying quick enough on the strut boots I was at work

Posted by: pilothyer Jan 8 2015, 05:42 PM

Mark............I gladly concede.........especially if this means that another superb 914 rubber reproduction may come from these fine specimens biggrin.gif Jerry

Posted by: 70-914nut Jan 9 2015, 08:48 PM

Jerry I'm still waiting for mickey914 payment. If I don't hear from him soon they are yours

Posted by: 70-914nut Jan 9 2015, 08:55 PM

Mickey914 just paid. Some mix up with PayPal

Posted by: Puebloswatcop Jan 9 2015, 09:35 PM

Do you happen to have any engine cooling sheet metal ?

Posted by: 70-914nut Jan 11 2015, 08:17 AM

QUOTE(Puebloswatcop @ Jan 9 2015, 07:35 PM) *

Do you happen to have any engine cooling sheet metal ?

I sure don't. I do have a battery tray repair piece that's new

Posted by: struckn Jan 11 2015, 09:10 PM

Hi, Would you happen to have a couple lower rear spring PERCHs? I need
them to replace KYB Shocks with new Sachs/Boge Shocks I have.

Posted by: 70-914nut Jan 17 2015, 07:47 AM

Pm sent

Posted by: 70-914nut Jan 24 2015, 07:47 AM

Bump

Posted by: 70-914nut Feb 22 2015, 10:08 AM

Bumb

Posted by: vcreamer Mar 11 2015, 08:02 AM

Rain tray and hoses ... Still available?

Posted by: 70-914nut Mar 22 2015, 12:09 PM

These early calipers have been in the shop too long. New pads and hardware. Painted with caliper paint to keep from corroding. 150.00 plus shippingAttached Image Attached Image

Posted by: 70-914nut Mar 22 2015, 01:33 PM

Light for?[attachmentid=493736]

Posted by: 70-914nut Mar 23 2015, 11:05 AM

Attached Image Attached Image

Posted by: hmssaab Mar 23 2015, 12:31 PM

Is the rain tray available? Any cracks?

Posted by: 70-914nut Mar 23 2015, 03:48 PM

Rain trayAttached Image

Posted by: 70-914nut Mar 23 2015, 03:53 PM

Anothe picAttached Image

Posted by: 70-914nut Mar 25 2015, 07:38 AM

Updated

Posted by: 80cap Mar 25 2015, 07:52 AM

Do you have head light surround covers? Also the chrome rings.
Brian

Posted by: chads74 Mar 25 2015, 09:49 AM

Do you have the rubber engine mounts that are in the center of the engine? for 1.8

Posted by: 70-914nut Mar 28 2015, 03:48 PM

Bump for a real nice set of calipers!

Posted by: 70-914nut Mar 31 2015, 02:51 PM

Nice front calipers

Posted by: 70-914nut Apr 2 2015, 09:09 AM

QUOTE(chads74 @ Mar 25 2015, 07:49 AM) *

Do you have the rubber engine mounts that are in the center of the engine? for 1.8

I might what do they look like?

Posted by: chads74 Apr 2 2015, 10:18 AM

QUOTE(70-914nut @ Apr 2 2015, 07:09 AM) *

QUOTE(chads74 @ Mar 25 2015, 07:49 AM) *

Do you have the rubber engine mounts that are in the center of the engine? for 1.8

I might what do they look like?


Attached Image

Posted by: 70-914nut Apr 6 2015, 12:02 PM

On replied to on parts

Posted by: 70-914nut Apr 19 2015, 06:22 AM

Bump please

Posted by: 70-914nut May 2 2015, 06:30 AM

New price for calipers that include everything! 100.00 plus shipping!

Posted by: djporsche May 4 2015, 10:32 AM

I'll take the calipers. Paypal? PM me total price with shipping to TX 78245. THANKS!!

Posted by: 70-914nut May 22 2015, 07:32 PM

Bump

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)